Search results

I installed a Skyjacker 6" Lift a couple months ago and the truck has a noticeable lean to the driver side. In front, axle center to fender is 1.25" lower on driver side. In the rear, axle center to fender is 3/4" lower on driver side. With the stock springs it also was lower on the driver side...

Does anyone know what micron the block filter is? Most injection pumps and injectors need at least 10 micron.

Hello all, I have an 85' M1008 and been doing some reading and watching videos. In a couple of them they talk about the 6.2 having 2 fuel filters. One block filter/water separator for large particles and a screw on filter at the back of the intake for smaller particles. I looked and the mounting...

My truck threw a belt today, I figured it was coming, and I need a little help. The crank pulley is slightly bent or off center, you can see it wabble a little while running. The balancer is new and tight, it's just the crank pulley. Is there somewhere I can get a new pulley for this? I've...

That is well worth the swap! Guess I'm going to go on the hunt for a good 700R4 and right TQ convertor.

What is the ratio of 4th gear on the 700R4? Is it worth swapping in to drop cruising rpm down?

Having trouble trying to load pics from my iPhone. I'll figure it out.

This is my 85' M1008. It was a FT Hood truck then purchased by the Gonzalez TX school district to pull busses out of ditches. They used it 16 yrs, averaging less than 1,000 miles per year. It had all fluids changed annually with Schafer synthetic. I've had it about 4 yrs now and put less than...