-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
B
m35a3 muffler install
Hey all. When I got me deuce it came straight piped.. so I went ahead and ordered a muffler for it. What does that smaller pipe connect to?? -
B
m35a3 adding reverse lights
Ok. So I should be able to reuse these metal run flats on the new rubber? -
B
m35a3 adding reverse lights
Ok I wasn't sure what that metal ring was. My deuce has XZL 395 85r20. I went and looked at the XML tires, they are in great shape. Stored indoors except for the last few years. They have run flat something installed in them, the owner said. Ideally I would be able to keep the beadlock insert... -
B
m35a3 adding reverse lights
My deuce has a 3 piece metal ring that bolts together inside the tire. -
B
m35a3 adding reverse lights
May be a dumb question, but can I still put the run flat inserts in these xml tires? -
B
m35a3 adding reverse lights
Cheers HDN, These tires are a decent deal, 600ea -
B
m35a3 adding reverse lights
I see a set of 6 395/85r20 XML michelin tires here locally. They are on rims, but not the same rims as my deuce. Will these tires swap over to replace the 395/85r20 ZXL michelins that I have on it? They all have cracks on the sidewalls and some between the treads as well. -
B
m35a3 adding reverse lights
Ah, I am assuming there is dex III in it... -
B
m35a3 adding reverse lights
My deuce does shift nice and smooth with atf in it. I was wondering what benefits there were if any for running the synthetic dex VI in it -
B
m35a3 adding reverse lights
Hey HDN, What kind of transmission fluid should I use? There is pink on the dipstick, so it is atf. Dex III is about half as much as synthetic dex VI. Not a big deal to spend an extra dollar on the synthetic, I doubt I will need do many fluid changes. But I wouldn't mind changing out what's... -
B
m35a3 adding reverse lights
Thanks HDN You've been very helpful. It does appear the jb weld is holding -
B
m35a3 adding reverse lights
I like and appreciate the ctis, but not when the fittings are causing flat tires. As it sits, it doesn't look like the 90⁰ fitting with be able to rotate without hitting the rim? -
B
m35a3 adding reverse lights
Had a leak in drivers side front tire. Finally got some soapy water and found the culprit. Doesn't look like this fitting would be easy to replace, so I opted to try jb weld to seal it up. Truck has manual locking hubs in the front, and the metal guards have been removed. I'm thinking I... -
B
m35a3 adding reverse lights
Right now the name of the game is getting any sort of registration. I made the mistake of saying I might take it off road or to a mud bog and the insurance company denied me because of it. So for the record, the truck will be used for going to the ice cream shop. Only 700ish hours on this... -
B
m35a3 adding reverse lights
Thanks again guys. I used a piece of 1" black plastic hose I had in the shop. I ran it from the air outlet all the way into the engine bay, and then connected it back to its original duct hose. My deuce made its first trip to town! It is going in for a commercial inspection. Having a bit of a... -
B
m35a3 adding reverse lights
Must be for the air breather escape on the air assisted steering! Is there a part number for this? -
B
m35a3 adding reverse lights
Could someone tell me where this hose is supposed to go? It comes off the intake at the elbow, goes over across the motor, and into the drivers side fender. But it's frayed and doesn't seem to go anywhere... -
B
m35a3 adding reverse lights
Thankyou for all the replies! The white lens' are missing, and they were painted over. Couldnt see them thru the camo! I ordered some new lens' for them and some bulbs.