Search results

Have any of you had a positive experience with a particular vendor? I've found a few sets on ebay for $500, sounds like a pretty good deal.

Thanks fellas, I think I'm gonna order MTR's because I have experience with them and know they work.

I'm about to order my 4" lift from ORD and need some new rubber. Anyone have experience with the 37x12.50-16.5 H1 Surplus Goodyear MTR or BF Goodrich Baja TA? I have used the MTR before and loved them and am leaning that route, but would love some opinions about either. Particularly the Baja. I...

The fuel gauge on my CUCV recently stopped working for no apparent reason. The needle is stuck on just above empty regardless of the amount of fuel in the tank. any suggestions on what I might try before dropping the tank and ripping my dash apart?

Thanks fellas, I ended up getting a 4" grade 8 bolt from ace hardware and used a a die to cut the threads a bit longer. I replaced the tranny mounts with new poly ones and put 2 nuts on the tag end of the bolts to make sure they don't back out. :driver:

I am missing a transmission mount bolt on my M1009. Ace Hardware can't seem to match it and all the regular auto parts store clerks are idiots. From the pub I know the part number is 14009324, and tpub.com describes it as: 5305-01-157-0880 Setscrew Required Description UNRC 0.500 INCHES 13 2A...

I thought about that but I'm in Fort Collins, Colorado and my truck is in Kremmling, CO on the other side of the continental divide. I might have a hard time on the roads with only front wheel drive.

The rear output on my xcase is a square/circle style with four bolts. As pictured in my original post.

Is this the right part? Parts

I recently blew up my NP208 and replaced it with an NP241 from an '89 Suburban. This NP241 has a slip-yoke eliminator kit installed so that the rear output flange (cv?) looks identical to the front output flange. Also the same flange as the NP208 front output. So I went and installed it. It's...

Dead on... thanks Warthog. Found the short and replaced the wires, now she's charging like a champ! -Melbatoast

Hi fellows, this is a great forum that I use anytime I have a problem with my M1008. Thanks for all the great info. I've always searched the forum and found my answer, but not this time. So this is my first post. My rear battery, nearest the firewall, does not charge. I have been swapping the...