Search results

Thank U MWMules and if a West Coaster wanted to fly in might the closest Airport be Atlanta or is there another/better?

Where Is the link to the specifics for this meet please, like WHOWHATWHENWHERE Exactly please? HERE http://www.steelsoldiers.com/showthread.php?126876-Official-2014-SS-Georgia-Rally-Info-SSGR14-thread

delete

For the new guys... These trucks will run on 2 standard size 12V truck / marine type batteries w/o issue all day long. I have 2 Sears B-14 Marine type batteries in front of my 400HP Cummins and it spins FAST during starts in warm temps. Your little 5Ton is only 250HP. (But I have a 5 Ton too...

You West Texas gents, if you are somewhat close to any GL outlet and if you or your local boyscouts (or?) want to make a few extra dabloons from time to time perhaps looking at stuff and loading out stuff and getting it off to me , just let me know via PM ONLY please. No bologna here, I...

Mikey you can get real close if you just do some simple math and then go to most any online conversion website that does volume . Fist, go out and measure the LENGTH and WIDTH and HEIGHT of the tank. Multiply the L x W = Y Then multiply Y x H = Z Z = your total (approx.) cubic inches. Take...

I am thinking about Solargizers for my M916 and M925A1 AND Schutt trailer. I got a small one, they make quite a bit of power... I am now considering a mount, maybe something that you can adjust to keep it pointing at the sun...

Glad to see group buys are now allowed. Where is the rules section so I can read it!

THAT was a real chore. My A/C System as of 10 minutes ago is now done less some strap up I did not want to do till I was 100% sure all my joints were good, and they are. The air blows HARD and cold. We pulled it down w/ a vacuum motor for 1.5 hours, the vac motor was smoking and hot towards...

CooL! Do you have a spec on the lights etc?

Who ya talkin' to?

Did you follow the fuel line 100% an look for dents, kinks, chinks and dinks?

There is a-hundred ways to skin this gerbil. You did good. Looks stout. My submission is several months back in this thread. I added a towbar bracket off mine. ;-)

I was RIGHT. I pulled my caliper bolts and found them rusted as I said and the actual surface of the shoulder part of the bolts had a poor / substandard machined finish, you can see machining grooves for cryin' out loud! I got all new bolts and the new caliper bolts are smoother than James...

Make sure to search this forum, using the search function, and see if there are threads from the past relevant to your scenario.

Hey guys, a new member is having some wheel removal issues. CLICK HERE and if you think you can help please do. All's I am doing is squat I do believe... :-(

Hmmmm, who is the resident 5Ton Hubmeister? If we keep bantering a man of knowledge will chime in, So long as you have done due diligence and read the TM's that is...

I "think" Michelins are rated for 55 MPH or so and THAT is why I would rather have Goodyear's up front and the cool Michelin XL's in the back... Personal Preference...

I might suggest that I "think" Goodyears are rated at about 65MPH Max. So they might be better for the steer axle. Having said this, and knowing how "cool" Michelin XL's are, I run Goodyears in front on the steer axle and Michelin XL's on the rear axles... Right or wrong, it is food for thought.