Search results

No kidding? Wow...I am glad I didn't just hack it off. My math says 6-8" is alls I need. Keep me posted. Very interested. I think my pintle bolt pattern is 4.5" x 4.5" .

Except all these 75 dollar bills are really adding up and they will torture me shipping it for England. Plus I just bought the trailer and an M916. I need a break for a while from hemorrhaging money. If I drag this to perkins I will get slammed. It is something silly, I need to find silly...

Chad, I can not decipher but I do have a Wiring Diagram. I think it leads to a 12V Power Relay ??? CLICK HERE

Wouldn't that roughly be 4000 pounds per tire if we have 6 tires and you weigh 24,000 pounds? Now determine your footprint w/ maybe a string wrapped around the footprint of the tire at rest, roll over and off the string and get a good estimate of the area in sq inches where the tire touches...

Guys my Schutt trailer has a 3banger Perkins GH-403D-07 engine that runs a hydraulic pump. It is like new but it has sat for maybe 4-5 years. One issue is the Fuel Solenoid seems to be bad. I pulled the solenoid and hit it w/ 12V and it does nothing. 1- Am I correct that the Solenoid rod...

Below is the sticker that was on my M916'S DRIVERS door but fell off. I saw the same sticker on an as-new truck and it was a bright yellow color, this is faded. There is a part number and NSN for this sticker but EATON refuses to sell it, they will not so much as return an email about it. I...

FWIW here is a pic of the CARQUEST number 53-22424 replacement switch which is probably just like the OE switch. Standard Motor Products DS-216 Headlight Switch = SAME SWITCH Standard Motor Products S-720 Headlight Switch Connector ( I am 99% sure this is it )

What are your plans for A/C? I have and M916 I want to chill too.

Sweet!

If your replacing a pair of like sized belts be sure to order a "Matched Set" . You can order belts as singles and they will all be a little different. As me how I know...

RUSTY! Welcome to the club! Thanx for the input. But did you see the pic I posted w/ the GUIDES (Black triangle deals) mounted to the front of a container and in use? They are to ease the transistion from flat to angled ramp and, the weight of the container does not drag on the runners, it...

Matt CLICK here for that part number but read the thread, look at what Dueceman is saying, I am so poor on Electrical I might follow your lead on this mod. Please include me if you can if you contact deuceman about his MWO, if he has a kit we might get two ehh? My M916 is surely the same yes...

I found the KENR6226 = Disassembly / Assembly manual for our engines HERE. Can someone help me look for Perkins Manual KENR6942 please?

Electrical Shutoff solenoid U85206452 for Perkins 402D 403D 404D 404C 403C 12V Search the above on Ebay if you want to save some $. This stop solenoid seems to be a frequently purchased part for these engines, I suggest it is not if, but when yours will fail.

Here is the link to go buy all the literature they have available for the Perkins Engine. https://perkins.midlandcorp.com/Products/ProductSearch.aspx I finally figured out why I was having an issue w/ that page. Everytime I went there I read it but I was not selecting ENG for "ENGLISH". Ha...

Welcome to the club! :-) If you find any facts dump it here!

STARTER; The starter was modified by SWP. (The Co that put together the Engine assembly) There is a little indentation they cut into the flange for clearance. That was not done at HI TORQUE Starters. So if you order a NEW starter you will be filing. New is almost $300.00 , you can send your...

Just give it the ole Lorena Bobbitt ? ;-)

yea...We need pics or it never happened! Like CSM Davis said! ;-)

Mike, I kid you not...lol, great minds think alike. This has been on my plate since yesterday, again, I kid you not.