Search results

Again, FWIW, I think I found that connector and it looks like it comes w/ a TOOL! I can not link to it here because it is on EBAY. I will PM it to you Andy. I went ahead and bought one, I think I read he has more. Go look at this.

FWIW I just found the part number for the connector that attaches to the FWCM. On PDF page #815 of tm...24P-1 , part #38. Scroll up to see the harness. Here is the poop; 5935-00-622-2830 96906 MS3456W18-1S CONNECTOR,PLUG,ELEC Now to try to find a HOW TO DISASSEMBLE / ASSEMBLE the deal as I...

CLICK HERE for a 35D wire thread from the past. CLICK HERE for a cannon plug thread from the past. I hope I am not muddlin' up your thread but just maybe between the two someone will find a resolve. I have been thru all this and go so frustrated I just moved on to other deeds.

The engine temp deal....To the best of my knowledge it gave erroneous readings and it was deleted by cutting the wire and I think grounding it to the firewall. Look up there and look for the temp switch then look for the 35 wire and where does it go? I HAVE A THREAD SOMEPLACE ON THIS. Yes the...

Added front bumper lower shackles. If you do it remember to ask for hardware, the 'long' bolts are indeed longer. Completed rear 2" Civilian Hitch Receiver w/ Tow Bar and Chain slung over for good measure. I might sell the parts to do this soon, you weld it all up, parts are water jet cut. I am...

Ill throw my hat into this idea as well...even it is a lil old.... I am looking for the WEEKLY GL WINS thread for today and can't find it. I actually "thought" it was a foeum sponsored deal. Am I right, 1/2 right, or all wrong here?

There was talk in the past about melting one open. If I remember right member NXF6 or something REAL close to that and a pilot member were discussing it...I might just grab a torch and see what happens...

All the following grounds on my truck were taken apart and all crud and paint removed to bare metal and all Put back together w/ dielectric grease, start washers and tight. E-Brake ground wire in cab. FWCM ground in cab at FWCM device. Hood to Frame. Frame to Compressor. Engine to Body. Starter...

Unbelievable. I pulled the E Brake ground wire in the cab to clean it and when done I tried to make the low air light come on as I had it working and NOTHING, PLUS the E Brake light was now off as well! I grabbed 2 other FWCM's I had and did some swaps and the E brake light came on w/ one of...

I have attempted to make this silly low air warning light come on till I am blue in the face. I replaced a-new both low air warning switches at the primary and secondary tank. I pulled the ground for them and cleaned to bare metal and re-affixed. The bulb is good. I have tried 2 other used...

Can you PM me his info too please?

I have in my sights a palletized water tank (tote) that will do well to add weigh to the rear and double as some water storage too. If you need it moved just dump the water and move it. 275 gallons + tank is about 2300 pounds. I see some sand haters. Best to AIR DOWN 'a lot' before you hit the...

NICE fittings Brian! Are you getting those local or do you have a URL for me?

Perhaps you might navigate to TM 9-2320-272-24-1 then scroll sown to PDF page #266 and do the tasks described.

Keep it...

In the first picture is that an anti-swivel / no turn bolt / plug deal there to keep the whole shootin match from spinning like a clock?

Ah HA! Ok so you run it blank if you have no trailer but if you have a trailer you display the "C", yes?

Gents what does the letter "C" stand for on the bridge plate numbers? One side has a "C" and the other does not as well??? I have read where a guy was looking for a YELLOW "C" and I have a RED "C", is there a difference there as well? If I had ot guess I would guess the "C" stands for TRANSPORT ????

That actually looks like a past auction, the first one that ever came up. Yea, they look kinda "weird" I guess. I like wierd...

Man this blows... Wannabe mechanics destroying peoples lives. Be sure to check EBAY locally and CL for tires. COKER tires I think sells what you need and they would be available (have to wait for shipping) from any tire store IIRC.