Search results

...and I wish I could find that legend that deciphers all that so I can figure it out...

OK Page 26 of the LO shows some stuff but please, where do I learn how to decipher the terminology, like; BY BH BL BK BJ BM ?

THANK YOU Doghead! I will look for that...

Thanx for the input and pics are always great! So can anyone address the fill and drain plugs? All of'them? DS=Drivers Side PS = Passenger Side There is a painted over plate on the top cross bar as well. I assume PS-1=OIL FILL PS (but how much oil?) I assume PS-2=OIL DRAIN PS...

OK so the "Clutch" is, for lack of a better term, NEUTRAL, and the drum will not turn under PTO power IN or OUT, correct? Am I correct this is to simply freespool the drum for any reason a guy sees fit? THE CLUTCH DISENGAGES THE WINCH FROM THE HYDRAULIC PUMP so the drum will turn free, yes...

Maybe Doghead will see this...he really DOES know a LOT! :doghead::-)

Thanx so much for the input GHall. I think I read the 100' wait deal in the TM, I think it said 6 minutes but ambiant temps will make a difference I am sure as well. It is things like that that are EXACTLY what I seek, thanks again! Any more winch EXPERTs on board who can address all my...

I own an M925A1. I want to fully understand and service and use the winch. I can not find instructions for my winch. I could probably clear up all my q's in 4 minutes on the phone w/ a well versed guy if someone were available. I closed the TM in disgust. I want to know what each and every...

So I have my M925A1 in my hands now and I have been servicing everything I can w/ time time I have. I have greased it twice because the first go round was done by a friend and many zerts were missed. I think I found all zerts but the short shaft, the driveshaft between the tranny and transfer...

I think I would have faked a dead battery just to see your Goat! HA! Actually the truck started right up after sitting for 2+ months w/ the night prior temp's at "7". I THANK YOU for your reply.

I am sure, it is even labeled ENGINE HOT indented into the plate, just like in the pic engineer223 posted above, go look. engineered 223 has a blank plate, I have a red lens that has a brass cap clear over the top w/o a tiny hole like you would see for the front axle lock or the high beams. I...

Good eye! Indeed those 6 magnets worked very well. In a perfect world maybe 2- more would be ideal but the 6 worked w/ slippage. I too did not want to drill all those holes for many reasons. If the magnets were attached it would be even better. NOTE; I removed the entire cover after about...

In looking for a "How Come this is like that?" kinda deal I ran upon this thread. My 1986 M925A1 has what appears to be a light that was painted over. I pulled the painted red lens and dragged it into my glass bead blaster and dang if the red lens has a flull blown brass cop covering it...

YES, AN M925A1 1986 Flavor, a repaint over Desert Storm colors. USMC When I picked it up in Spokane she had sat in 7 degree weather the night before and had not been started in over 2 months. I gave'r a 4 second shot of ether up top and hit the go buttons and she lit off in about 4 seconds...

Carlo I saw this thread before I left and I made sure to stop and take a few pics while I was still in the snow up north. My M925A1 sat in the snow for 2 months. The night before I arrived the temperature was 7F , Seven, as in between 6 and 8 ! Burrrrrrrrrrrrr! I arrived, I gave it a 4 second...

GUYS DOES ANYONE MAKE A 2" SQURE TUBE RECEIVER THAT WILL FIT AN M925A1? i AM IN KINDA A PINCH AND WOULD RATHER BUY THEN DESIGN AND BUILD. TIA! Opps, Caps Sorry.

My pleasure, hopefully a few others will find this and snag them too. Just click on the word THANKS to the right of the up-thumb! Lets see how many get DL'd! That is a good way to count.

Here are all the latest and greatests TM's for the M925. The M925 is of the M939 "Series" . These files will not be up for long. They I believe are all 2012 flavor. They are HUGE some of them. Click walk away and repeat... The first one, the -10 file is a MUST HAVE, the next 3 are...

The way to sell these so as to overcome the guys who can not drop almost $3500.00 (with tax) on them is to primer paint all the parts and stuff them in the bed and put it all on a pallett and loose the expensive stickers and man hours to build them and sell them as a kit. BYOW ( Bring your...

Thank U gimp, and I would love K Boom QF...