Search results

Hang on to them at meets some one always has these in use try their keys sooner or later you will open some.A while ago I tried some of mine at the local armory and the third one opened the lock on their PLL truck so at least it can be fun. DavidB

RE: Re: Unknown trailer ??? Transport system for aggrigaite spreading box mounts to rear of truck from side.Wheels removed slides on runners at bottom ends.Three sold at McCoy not long ago. DavidB

Should be running in the rain now,but by dark will be getting cold again and ice.Good luck . DavidB

Alcohol bottle is jar shaped another plastic vessel could be windshield washer resivor.Check for wire handled pump under dash. DavidB

Slide collar back and clean out holes to see winch shaft holes. DavidB

Truck parked, E brake on,engine off,PTO/transfer/transmission in neutral.WINCH ENGAGED with drum lock on this will hold winch in one spot. Turn shaft until holes line up, remove old pin,replace with new.Disengage winch job is now complete.This is my method, it has been awhile since I have broken...

Small box on drivers side fender may be the flasher unit for dirrectionals. DavidB

Have pounder/remover and rods here also,but no fancy canvas case. DavidB

Attachment point for ground spades for winching operations with rear drag winch on wreckers. DavidB

RE: What is the best year of Duce to buy? Westech is right on this one. Pick options, condition and then year if for license issues(collector/vintage). DavidB

Try again, this is a deuce from this picture. DavidB

Power in, power out, and drag to what you wish to pull.Never seen a cable stiff enough where you don't have to pull it some. DavidB

Pulled one of the newer three axle break bulk trailers for a friend real challenge for the M275a2. DavidB

Fender mounted air cleaner? Leads to a five ton of some vintage. DavidB

Also a great father, daughter,and wife project.Much fun and seems a good investment if you do a good restoration. DavidB

Do you mean over the front ? Yes it can, sorry no pictures at this time.Check TM possible one there. DavidB

I like them 180 apart also, same reason hand size. DavidB

FOR WHAT? DavidB

M35A1 had the smaller ld427 engine A2 are the ld465s. DavidB

Purchased directly from goverment agency---------GL is a private company contracting to government, differant problem.I also would seek a SF97 and go that route. DavidB