Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks Mike, Thats what I read as well. The problem is the steel frame work must be for something else other than the vestibule. NO worries. I appreciate everyones help. Thank you all. IGD
Picked it up at the GA rally last year. There are no instructions. If I had instructions I would not bother the forum. Thank you all for your help.[thumbzup]
Looks like I am making a wood frame.
Installed a Binocular holder as a cup holder and a Ammo can as a console. Also painted the Ammo Can seat base to match the truck. Reinstalled the fire extinguisher to a better spot.
Speedmon
Thanks for the heads up. I went through those already.
I was looking for the vestibule frame schematic / index / instructions to put together. You would think its a simple task and straight forward a child could do it but when you lay it all out to put up, nothing makes any sense.
I acquired a NOS vestibule for a command tent. I searched HI/low for the basic set up instructions/TM and am still coming up empty handed.
Does anyone have the Intel to share..?
Gunfreak, I just read this entire thread. I got to say you do a 1st class job. I like the face your using a 6.2 Please post the first run in viedo...k
IGD
I just picked up a 24v forklift battery for the 109. The AH rating is 560 Ah @ 30 minutes. Thats huge for a X4024. I am mounting it through the floor and between the frame. I have 1.75" wiggle room. I am hooking it up to the truck so when the engine is running the battery is charged. 4 Sharp...
I had some time waiting for a FedX shipment and I noticed a few threads with questions about inverters and converters so I thought I would put the information out there. I first started using them for the band to play remotely in the woods, beach or a makeshift stage. Then on vehicles then on my...
That green wire hanging should be grounded to the unit and the generator unit tied to a rod in the ground. At the house that green wire installs to the Neutral buss bar. The Buss bar is grounded to a rod the full 8' in the ground, unless your close to the water.
Here is a good example from the...
Ground, Ground, Ground..!
The first picture has no ground attached. #1 Ground the unit and #2 the new transfer switch to a new ground rod each. Use dielectric grease on the acorn nut and use a good copper rope.
All I can say is GROUND, GROUND, GROUND..! I just wired a 200A panel this past...
Bob, I saw how much you like Mopar. Now thats an excellent example of a Granddaddy Dodge Power Wagon.Not to many of those around, thats a rare truck. Were those lock outs on the fronts..? I cant tell..?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!