Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I like mine.
I use 3 of them. They are tuned and tweaked with dual cobra whips. I like the radio. Here is a picture of the dual antennas installed with a fresh paint job. Whats good about dual whips is they can be tuned for HI & Low frequencies easily.:driver:
Thanks man. I talked to Unclemikey and he gave me permission to use the name INFIDEL he even sent me the vinyl graphics for INFIDEL.
I have it in Arabic and English. Dearborn Michigan has the highest Muslim population in the US so I am going to drive around town for a few hours to raise a few...
Final coat
The final coat is on and dry. The wheels took some time sand blasting but it was worth it. The next set of pictures will be complete.
Then I have to install the DIY rock sliders on the 1028.
Tow4,
I wish, I aspire to have a garage, this project is being done at a neighbors wood heated Pole Barn. He is in the excavating business so he has the big toys and a big garage to put them in. I am a lucky guy to have good neighbors.
Jim, I am pleased, the first start up went well. I have a set of Moto Guzzi mufflers for that unit. They will bring the sound down to 1/3 of the factory. Dogg is right on the 60 Hz tip. As promised I will stand behind this unit for a year so any problems at all just let me know.:beer:
Spent last week prepping the truck for a fresh paint job.I was lucky and got a good truck from Oddball, Only had 6 rivets that rusted and had to be repaired. Other than that the truck was rust free, not bad since last month was her 40th birthday.
Today was finally time for the first coat. I...
Spent last week prepping the truck for a fresh paint job. Today was finally time for the first coat. I went from a 3 tone camo look back to factory. I still have along way to go but the hard part is done. :o
Just butting in here, My turbo in an Isuzu NPR went out and I had to have the truck towed, w/o the turbo there was no pressure and I was blowing black smoke so bad the cloud covered the expressway. Point being gimps engine is off, it's going to be a cold day for him.
Hope he brought his...
The things that happen when people get rushed and forget to tighten the drain plug. I will remember this and use locktight next time, could happen to anyone. At least gimps not in Alaska -30 doing a turbo swap.
Jim, I am glad to see you finally took delivery. I know you will be happy for many years to come. That MEP-003 belongs in a museum. I would like to see a You Tube of the initial start up and your honest evaluation. Remember to check the oil before start up.
I want you also to know I have in my...
Today Tom, Derick and I did the final wet sanding and complete wipe off/ blow off in preparation of Sundays paint job. I figured there is a total of 54 hours so far into the prep of this beast.
I went down to Mazza and picked up a large 12oz syringe of 2 part epoxy to seal the LED light...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!