Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have truck and genrator that uses 2pin / truck and fuel pump that uses a 1 pin / and a new 2pin jumper cable so the adaptor seems like the way to go
Harry
any one know if they make a nato cable adaptor (old style 2 pin)
I want to be able to use my old style( 2 pin )cable on new style 1 pin receptacal (female)
the adaptor would have two hole female on one side and 1pin male on other end
Harry
Have a M35a3 their is intermittent wobble in frount end above 40mph .
tightened link ends , tie rod ends are tight .
using a tape meauser i measured tires and their is no toe in
measured M35a2 their is 1/4" toe in no wobble (drives fine) ,
could toe in cause a front end (...
I used hole saw that was same size as inside of cup then welded the cup to out side of box just welded the 4 corners of the cup (so water would not have a place to sit )
worked well
Harry
I replaced missing counter weight ,no change
my stering box has a leak ( around steering arm shaft ) Going to replace gaskets and seal in spring ,to cold outside to work on now,
Their about 4000 miles on gage I wonder if they replaced steering box when they did the conversion to A3 ? CTIS...
they sent me this in Oct
Harry
Dear Valued Customer,
Please note that payment terms have recently changed.
Effective immediately, credit cards will not be accepted for any single charge in excess of $25,000. Payment will be required in the form of certified funds (i.e., cashier's check or...
I can take my hands off wheel when its wolbing ,still goies fairly straight
I will check toe in, might need a little
the lug nuts good idea
can a truck tire shop spin balance on truck?
was missing a rear wheel counter weight ,added one made no difference
Thanks for help Harry
I get this wobble that comes and goies it happens at speed 45+ feels like truck is moving side to side can feel it in sreering wheel but dont think it coming from front tires ,if I slow down a bit and speed up again its ok for a wile ,
you think could be when rear tires get in a certian...
Any one know if theri should be front running lights on a 1968 M35a2
all of my other lights work , their in no front amber lights , ecpet when blinkers are blinking ,
would be the top bulb in light bucket thats not lighting
thanks for any help Harry
tire pressure
hade set to hwy so they were pumped up
will try that next time
I have a load in it now will be going up north wensday,will see how rides
Harry
I have cover and working CtIS but their is no counter weight , thinking some one changed out tire with spare , the spare has one ,would be nice to have one on all the weels
will be instering to see if make a difference when driving. I did about a 10 hour drive ,seemed like the back end...
Hello
Looking for 1 M35A3 wheel counter balance weight
a friend pointed out that I am missing one on rear wheel
maybe that caused some of the rear bounce ?
Thanks Harry