Search results

And it is also for sale .

I noticed in one pic the tire is flat , you do not want these heavy trucks to sit on a flat for any period of time . It will ruin the tire and you will have a blowout . put some blocks under the truck to keep it of the ground until you get leaks fixed .

In my application . We are not talking snow plow only . We are talking State of IL plow truck running a hyd salt spreader , plow and raising a bed full of salt while cruising down the highway. I koded the bed fukl of rock ,dirt and sand until it was spilling out the sides , it seemed to raise...

The setup i have on my dump is not factory and is available aftermarket . It is made by Muncie . It is avaikable with serpintine or the v belts .

I have a plow truck with a Cat 3116 in it . It has a belt driven hyd pump . It works the dump bed , plow lift and angle and runs a hyd, salt spreader . I believe it is 8gpm . You have the option of Vbelt or serpintine belt . It cost around 5-$600 . With the right belt driven pump you should have...

Also hard for me to tell , but looks like you got a good fiberglass hood rather then the old chopped up A2 hood .

I am in desperate need of one these . Anyone who gets one PM me with price .

You buying or selling ?

I think some of these people have so much money and to many toys , but little time to play on the internet like some of us do .

Just in time , I considered not plating my A3 and letting it sit a year to get some projects done . It gets expensive to drive less than 1000 miles a year. THANK YOU !

Do not get a 110v mig unit , you want at least a small 220v mig.

Easy way to find out is bid on them when they first open, then you can go back after they close and see what they went for . Sometimes they may go for 1100 sometimes $4000. Shipping is getting pricey , so look for one close to home .

I have added a small amont of two stroke oil , but no ATF . In my opinion in small amounts ( 50 -1 ) you would be ok , but that is my opinion . I would not use even large amounts of oil in my multifuel . I also do not have access to large amounts of WMO , so I just prefer to add small amounts of...

On my A3 with H mileage plates and my 20,000 tag trailer I am at $ 550 . This would save me some money .

Although still unsafe and illegal , if the dump would of been put on the trailer backwards with the engine sitting over the trailer axles the poor fords bumper may not have been dragging the ground . Not knowing this simple procedure makes me think you may have a hard time learning about these...

would you have any pics or diagrams of the plunger guide ? I belieive this is the part I have broke in mine , but I can't seem to find a part #. Thanks, Joe

I saw a take out from a A3 go for around a grand on ebay . Whole A3's can go for as little as $3500 .

Nice deuce and dump . I think you could have put the deuce on the trailer backwards and still had enough tongue weight. You has alot of tongue weight on that bumper .

Well for as long the WTB adds were in their it helped me . I got a reply and got what I was looking for . I prefered to have the for sale and WTB seperate , but I guess I missed that poll .