• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. C

    MEP-802 Battery Hold down

    perfect just what I was looking for thanks!
  2. C

    MEP-802 Battery Hold down

    So I bought two 51R series batteries for my MEP802 and for the life of me I cant figure a way to secure them down. I heard the factory way was J-hooks yet I see no holes or evidence of them ever being there. Could some one please provide me with a picture of how your batteries are secured down...
  3. C

    Obsolete qlow plugs for generators

    Have plenty email me at Davidnykp@aol.com
  4. C

    MEP-803a auto frequency controller!

    While I think this is very cool and innovative My 802 barley drops 2hz from no load to full load. I don't totally understand the point. But sign me up I'll buy one
  5. C

    MEP-802a cold weather starting

    Never had any issues starting my 002 or my 802 at 0 degrees if your having issues I think you better give it a good once over
  6. C

    Blended WMO in MEP802A

    It will work add enough gas to thin it out
  7. C

    003A DC Regulator/Rectifier

    Get one from triple Jim he is the MAN!
  8. C

    Repurposing Mep002A/ Mep003A Engines

    How about sell me one
  9. C

    MEP-803 Engine Replacement

    With $100 for a head gasket sounds like a solid plan
  10. C

    Mep002 strange voltage issues.. Please help

    Ok ill measure the C1-C2 and see what it comes out to. I'll also try to film and video so you can see how strange this issue is. Thanks for all the help your a life saver
  11. C

    Mep002 strange voltage issues.. Please help

    Same readings... If the CVT1 developed shorted windings would I have a power out put reduction? The generator will still run a 133% load?
  12. C

    Mep002 strange voltage issues.. Please help

    Ok I'll give that a shot
  13. C

    Mep002 strange voltage issues.. Please help

    Tested with a fluke and the killawatt is dead on... So confused
  14. C

    Mep002 strange voltage issues.. Please help

    It just hit me that maybe I should try a different voltmeter other than the kilowatt
  15. C

    Mep002 strange voltage issues.. Please help

    I received the regulator beautiful construction easy installation! Started up generator worked perfect. After five minutes of running it went back to doing the same thing. So aggravating! Lowest obtainable voltage 124 either way you turn the dial voltage will increase. Voltage Gauge on the...
  16. C

    Mep002 strange voltage issues.. Please help

    Thank you Jim I think a good spot to start is a new voltage regulator wouldn't hurt to have a backup anyway
  17. C

    Mep002 strange voltage issues.. Please help

    So my MEP 002 has always been as reliable as a rock today I started up for it's monthly cycle and it would not hold steady voltage. The more load I put it under the higher the voltage went. Turning the voltage knob did very little in fact raised the voltage level when trying to decrease it...
  18. C

    Picked up 6 MEP-802A gensets and will be documenting making them all runners here

    This is what I said from his first post when when he was pulling out the fuel pumps thinking they where injectors. SLOW DOWN. At least one of these generators he should of just thrown fuel in it saluted it and turned the key. The guy had huge drive way more then i ever I hope he is ok
  19. C

    Anyone Deal With Green Mountain Generators?

    Thanks for coming on the board Bob. I have seen your products and they are great high-quality. If you want to MEP and don't want to work on one and don't want to get screwed on auction Bob is the way to go. With that being said mEP's are a hobby. For the money if you're not looking for a...
  20. C

    MEP-802A and MEP-803A fuel consumption

    And back to topic fuel consumption depends on load I think my MEP002 will empty a 5 gallon tank in 5 hours at 100%
Top