Search results

Ill give it a try

Anyone have a pic of the black ground wire at the fuse box. I can not find it or see where it would attach.

Any one know why the low coolent light would flicker on and off. Yes I did check the level and the sensor is fairly new.

I just saw an in-line temp gauge by flex-a-lite in the janurary edition of 4 wheel and off road mag page 85. It is installed by cutting the upper hose of the radiator inserting the piece between the cut pieces and using hose clamps on either side of the inserted piece. then a regular off the...

thats what I thought. I did not want to pull my out for fear of breaking something

Is the attached a glow plug card, found it in a civi 6.2?

replaced the relay still no voltmeter or heater fan

That might explain my volt meter not working

What does the relay on the left do? My accessory fuse is loose and when I push it tight the left relay clicks. The one my finger is touching

Everything is good on that side, so it appears. I was not worried at all. Route 5 to San Felipe is well trvelled by the police and military always has been. The military check points were set up years ago at the request of America to stop the drug runners from using Route 5. This was my 5th...

Tons of police around. It was the San Felipe Baja 250 weekend.

Wel finally got the blazer running the way I want, so I took it to San Felipe Mexico. This was the first long trip since doing the work to it. Drove the almost 500 miles only stopping for fuel. I got over 21mpg on the way down I kept the speed around 70mph so if something broke I would hear it...

I am positive its not the valve cover, i can see it dripping at the head gasket. Its oil no diesel smell.

My blazer has a leaking head gasket. It is only leaking oil and no water is getting in the oil. The leak is at the rear of the drivers side between the head and block. When parked it leaves a golf ball size oil spot. I use the truck everyday without issues, I just check the oil every couple...

I did use the rosscommon. It was to simple. I didnt expect it to start because I never get things right on the first try. The only thing that was diffrent from the instructions was the glow plug relay wire was not hooked uo to the big resisters on the fire wall it was hooked up to the 12v...

Well after months of trying to figure out why the front battery didnt charge, I did every check according to the TM's, I coverted the blazer to 12v. It was pretty straight forward. Only had to cut one wire. the rest of the wires were just taped up and then wire tied in an out of the way...

Thanks. Change both fuses still not charging front batter, no fan and no volt meter. Tomorrow is the day 12v conversion

Is that the same circut that would make the volt meter gauge work. Mine is in op. Best guess bad gauge or wiring??? Going out now to look for fuse if I cant locate I will wait on your diagram

at the top of the fuse box is a blue 5 amp fuse which I replaced is that the one we are talking about or is there one I cant see

warthog which fuse do you mean very top my fan does not work Chuck