• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Mohawk Dave

    Gen 1 light coming on

    thanks, Dave
  2. Mohawk Dave

    My new M1009 CUCV!

    eVERYTHING 4X4 FOREVER AND SARDOT SAID, plus an oil filter. I see you're in So Cal, as am I. The Barstow and Nevada bases are draining fluids by punching holes in the tranny pan, fuel tank, and removing the diff covers-(and not replacing the bolts), and they drain the t-case. so bring those...
  3. Mohawk Dave

    Gen 1 light coming on

    I am having the same problem. I do not have the truck here now. Can you tell me where it was shorted out? Under the dash? pass/driver side? under hood? what wire? etc. Thank you very much, -Dave
  4. Mohawk Dave

    1984 CUCV M1009 build thread

    ssgtcampbell77, I am not running the HMMWV wheels as of now. Due to the fact I do not have the D60/14B 8 lugs from the M1028 yet. I am running off the shelf Pro COmp wheels that are 6 lug for my 10B axles. They have 4.5" backspacing. I have read that b/c the HMMWV wheels are only 2" in...
  5. Mohawk Dave

    4x4 CUCV Preparations

    DTL, We went right above the lip. I do not rub even at full bump/steer. Here's 2 pics, one with the marker line and one with Roy plasma cutting. -Dave
  6. Mohawk Dave

    1984 CUCV M1009 build thread

    continued:
  7. Mohawk Dave

    1984 CUCV M1009 build thread

    1984 m1009 build updated Hey Guys, Here it is so far. Still have to do electronics and vinyl kit on the interior. Buy the M1028 for axles, and add a/c and turbo. Any questions just ask. Enjoy. P.S. The interior paint is not as red as it looks with the camera flash. It is the bronze, just...
  8. Mohawk Dave

    4x4 CUCV Preparations

    Hey TCUCV, I know you saw my M1009. No lift with 37s, just trimmed fenders. Go with a lift if you want of course, but it is not needed. No lift will keep your center of gravity down, but Obviously a 4" isn't stupid huge, so do what you want, it is your truck after all. I personally think...
  9. Mohawk Dave

    1984 CUCV M1009 build thread

    Big Thanks to Brett09!!! He came over today and helped out on the build-doing electrical maintence and troubleshooting. Thanks Brett!!! You're always welcome.
  10. Mohawk Dave

    Overview and video tour of my M1009...

    very cool! This is way better than photos for decription purposes. Thanks!
  11. Mohawk Dave

    How strong are 10 bolts really?

    Thanks guys, And Westech, as far as wannabe, I did not take offense to the comment, and I know it was not meant towards me. If you look at my build, I think we would all agree that we don't waste time on builds. I just have to fork out $3k+ for a M1028 and my pockets aren't that deep YET. I've...
  12. Mohawk Dave

    How strong are 10 bolts really?

    Hi All, I ask b/c, as you know, I just picked up a M1009 with the 10 bolts, 6.2 diesel, and t400. I will be swapping the d60/14B w/4.56s gov-lock & L/S from a M1028 when I save a little green. But until then, I have the M1009 on 37 HMMWV tires, and it will see the southern california desert...
  13. Mohawk Dave

    cucv tires

    I would go with BFG A/T. We have used every tire under the sun from full race to mom's car, and we now like to run BFG A/Ts on everything that does not see race abuse. THEY WORK!!! and they work on all terrain, snow, dirt, sand, pavement, mud's pretty dang good, and they are tougher than most...
  14. Mohawk Dave

    1984 CUCV M1009 build thread

    cont:
  15. Mohawk Dave

    1984 CUCV M1009 build thread

    Freek, yes, BITD, MDR, SCORE, SNORE, and any others our pockets allow. So, we started the cage Tuesday, here's progress so far. We're just bolting to the cab as this is NOT a race vehicle and will NOT see high speeds. As it gets 20 MPG, i will DD it a lot. I did not want road noise and diesel...
  16. Mohawk Dave

    Is it worth it? Air cleaner and exhaust mod.

    Quiksilver is correct. Less restriction=more flow. More air/fuel=more power. It won't be a massive gain, but with a K&N it will last dang near forever with proper cleaning and oiling. It can't hurt to have it. As far as the exhaust goes, same principle, 2.5 exhaust will be fine. I would only...
  17. Mohawk Dave

    1984 CUCV M1009 build thread

    hey Still, Thanks! if you want fiberglass you can check out Trailer Products at </title><link href="styles/style2.css" rel="stylesheet" type="text/css" /></head><body><div id="container"><div id="masthead"><img alt="" height="97" src="photo/logoshop.gif" width="270" /> <title> or Hanneman...
  18. Mohawk Dave

    M1009 Featured in Four Wheeler in 2006

    stillstandingstill- here it is. Active Duty: 1986 Chevy Blazer HD CUCV - 4-Wheel & Off-Road Magazine That's how i'm doing my bumpers also. -Dave
  19. Mohawk Dave

    1984 CUCV M1009 build thread

    pacebm- no lift planned, possibly a set of deavers and some Fox 2.5s. And yes! the hills are killers. I just drove it out to Primm and the hills by Stateline caused top speed of 40 mph. Can't wait to get the 4.56s and turbo. Cucvfreek- I live near Beaumont. About 7 hours south of you...
  20. Mohawk Dave

    1984 CUCV M1009 build thread

    more pics.
110,021members
164,765threads
2,318,121posts
1,282online users
Top