• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Gen 1 light coming on

84cucv1ton

Active member
1,822
0
36
Location
New Jersey
few night back i put on the blower motor. all the way up. my gen 1 light would come on when i turned on the blower motor. little while later. the 30 amp fuse at the top of the fuse block blows. put in another one. blower motor does not work at all now. when i do turn it on the light in the dash dim. checked the volt meter too. says there was 30.00 going to the gauge.

i have no clue where to start with this. any help would be great thanks
 

Mohawk Dave

Member
226
14
18
Location
CA
I am having the same problem. I do not have the truck here now. Can you tell me where it was shorted out? Under the dash? pass/driver side? under hood? what wire? etc.

Thank you very much,

-Dave
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks