Search results

Okay, here we go. I disconnected the upper hose from the swivel coupling and connector came off the black tube just like the bottom one. The ring that your green arrow is pointing at is just tan paint that got on the tube between the connector and the rubber bushing. The tubes are aluminum that...

Hi Ray, I removed the band clamp and rubber to see if there was anything under it that might show me something. Here is a pic before I removed it

Morning Guyfang, Took it apart and the pics attached. Still dont know how the metal coupling is attached to the plastic nipple from the cooler. It's perfectly smooth, both nipple and the inside of the fitting. Might have to get another cooler.

I heard it run when I got it but when I started it up myself, it went into run-away and before I could choke it out, the line blew off

Thank ya'll, guess im gonna have to find another oil line. Appreciate yall

Afternoon all, hope all survived the New Year. I have a MEP-016B generator that the oil cooling line came loose ay the oil radiator. I know this generator has never been messed with due to only 2 hours on it and all the original paint. It came apart at a connection you would think would be...

DARN nice reply, I will remove the pump again and check. Thank you so much for the info

WOW...... took the injector pump apart, had rust and gummbed up. took a day to clean, and polish, Re-assembled with no problems, as long as you get all of the timing correct. Not that big of a deal. Anyway, installed and fired right up, only problem is the engine went into run-away. Off switch...

Thank you sir for your reply. I will search that part you described. It seems pretty simple but didn't want to dive into something without asking.

Have a unit with only 2.7 hours on it. Had to repair transfer pump, getting fuel in and out of filter but not getting any fuel out of high side of injector pump. Removed pump, looks brand new from outside. Looked inside of return line port and see a little rust and some gunk inside. Question...

As always, thank you sir. I had heard there might be a 24V electric fuel pump replacement in the mechanical one can't be found

What is wrong with this picture. Diaphragm shaft housing on a 12 degree angle. Shaft housing cracked at the base. Anyone know where u can get a new pump?

Yes sir, installed new gasket. It's a fairly simple pump, not much too it. Thinking about adding another gasket for clearance. I know the unit wasn't designed to be assembled that way. But no other choice. I'm right next to one of the biggest Army bases in the US, Fort Bliss. Think I might go to...

Yes sir, correct pump. I have the complete manual and verified. This is a mystery to me. Thank you so much for responce

Yes sir, proper pump, still had all of the Marine tan paint on all of it, had never been removed. The pump base is a oblong triangle. Can only go on one way

Morning all, newbee here. I picked up a 2008 MEP-016B unit with only 2.7 hours on it. Flushed every thing and added new oil and fuel. I was unable to prime manually , had no resistance at all. Removed the pump and disassembled. There were no sign of gunck or sludge. Diaphragm in good shape...