Search results

Hey Guys, Went out today with one of my m35a2 and the brakes got supper hot about 400F. Hub where cold as ice and the air Temp is about 35F today, there snow on the ground. Just did bakes on it last weekend. Brakes are adjusted right when I jack up the truck the wheels spin freely no drag...

The injectors in the truck are a two hole and the opening pressure was 2750 to 2800 psi after I cleaned them all.

That was a pic of my DIY cylinder compression tester. I bored out a old diesel injector and weld the fuel supply hole and add a gauge to the pressure top.

I was thinking of that. But if it was stuck ring when I did the cylinder compression check it would have showed up. I would think

Hey Guys, How can you tell if you have a faulty injector pump. What are some symptoms and is there away to check a injector pump when it is one the truck. (Example: can you put a high pressure fuel gauge Hydraulic Head)

Hey guys, So today I checked the injector pump fuel adjustment screw, and it look good. I also checked the Throttle linkage & the IP Timing they where good too. Finally I check the air breather filter & it was clean swapped it with a new one too. Now I am out of ideas what to check truck...

I didn't try to measure the injector return line

Hey guys, So today I finally got time to work on the M35a2. Removed all the injector nozzle and cleaned them. I also did a injector pop test on all of them. They all open at the pressure the (tm 9-2815-210-35) recommends and they did not drip or leak when high pressure was left on them. Then...

https://www.youtube.com/watch?v=qb-JNdE4er4

https://www.youtube.com/watch?v=40xd_H0TjLQ

frank8003 Thanks for the TM Manual Great Reading. So today I pulled out one Injector out of my spare motor in the garage and set up my Diesel Injector Test for the first time. Had to custom make a adapter from Diesel Injector Test Pump to the Injector. All works good now. Just need to pull the...

Also can so one show me where to find (TM 9-2815-210-35) I google it and could not find it. Tried here to in the manuals part and could not find it. THANKS

The last video oil was full and clean, water temp was (+/-160F) at the truck dash gauge & temp was (+/-148F) with a senor gun. The truck has clean fresh diesel fuel in it. Drained & cleaned the tank the other day when I changed out the in tank fuel pump. I have not tested, cleaned, or check the...

https://www.youtube.com/watch?v=x5N-KsKLju4

https://www.youtube.com/watch?v=Gw7chX07eQM

https://youtu.be/Tm7IrI2HWlc

So Today I Cleaned The Bypass Valve (That Was Not Dirty Or Sticking).Toke the truck for a good ride and no improvement. Also there was no Fuel Pressure Fluctuating when driving. But top speed was only 40mph, that all the truck will do now in 5th gear and the gas pedal to the floor. Next thing I...

Also any ideas what would cause the fuel pressure fluctuates rapidly at 2400rpm.

So today I replaced all the filters and the fuel pump. But NO improvement. Truck still Not running correct. Next I put a PSI gauge on the in tank fuel pump and got (+/-10psi). I also put a PSI gauge on the engine final fuel filter housing and got (+/- 8psi). Final I did the maximum no-load speed...