Search results

I order a parker pump and new fuel filters the other day. Will updated when it all comes in & I install them.

I have not tried them out yet still need to run air line. Just been to cold to work on and been supper busy with my new toy (M998). Has the date been picked for spring rausch creek rally?

Hey guys, Sorry for the long time before replying. So I have been checking all the thing you guys have been replying too and they where all checking out good. But yesterday, I when for a drive to drop my kid off at school and notice I could not hear the in tank fuel pump and lately the truck...

The Hole Rear of the truck is on jack stand and off the ground. The truck is in neutral so the driveline should be free to spin. I should be able to hold one wheel, while turning the other wheel. But I can't, when I spin one wheel the opposite wheel spinning in the opposite direction and can't...

Hey Guys, Today I was working on my buddy's M35a2 Rear axles and I notice when I spin one tire the other spin in the opposite direction and I cant hold one side when you spin the other side. I thought the axle where open diff, There for I thought you could hold one tire on one side when some...

The turbocharger is working I can hear it whistling and I can seeing it make boost on a boost gauge

Ok so today I toke it for a good 95 mile ride. Outside temperature was about 40deg. So I put cardboard in front of the radiator to bring up the temp of the truck it got up to about 200deg. So I pulled over and removed the cardboard and the truck ran the rest of the trip at 180ish. Truck still...

I always cover my trucks exhaust with 3D Printed Caps I made to keep out the water in them. Also the caps work great at keeping out any thing in the exhaust and there pretty tight on the pipe. Some time I for get to remove them before I start the motor and they take off like a rocket to the moon.

it was 56 Degrees Fahrenheit today not cold

https://www.youtube.com/watch?v=1djWIDXmizQ

https://www.youtube.com/watch?v=Q98VmDU-H2E

Hey guys, So today I finally fired up my m35a2 and toke her for a drive and she blows white smoke. The truck has been sitting since May. Been redoing all the axle (brakes, seals & bearings) and putting in arb air locker in all of them. The motor ran for a go Hour today, It ran great no lose...

To day I got the brakes bleed & brake shoe adjusted. cross-posting deleted.

Finally got the last axle on last night before the rain. Just need to bleed & adjust the brakes & add the air line and she done:p

Hey Guys, So today I got the final rear axel painted Black and ready to go back on the truck:-D. Also if any one want's to know I am using raptor epoxy primer (Gray) and a car flat black paint for the top coat.

More To Come Soon

More Pictures

More Pictures

Long time since I have done a update. But here is where I am with the project so far. I have install the front locker and replace all the seals, bearing, and breaks. Painted the front axle and reinstalled it in the truck. I also had done the middle rear axle to and are currently painting the...

Drove about 300miles round trip yesterday to Red ball Military Vehicle Show & Swap Meet in Pa doing 75mph most the way. Humvee drove great with the new Centramatic that I install, the steering wheel has NO shakes in it:-D. I also drove 200miles round trip today to Indoor Military Invasion in...