Search results

I honetly dont know much, but I do know there are 2 posts on my solenoid for the relay. One is labeled I think B and the other S. (Outer post/Inner post) are you connected to the one labeled S, or the inside one? Is the fat wire connected to the bottom post? Is the post at the nose of the...

Got the heater/blower to work. Part of the electrical fried itself and melted the waire in half. I saw that when I bought it but only recently got around to working on it and totally forgot, so I spent an hour fumbling around with a multimeter and reading schematics. The melt was just before...

Wish I read this sooner. They had a new one at Napa an I just installed it this morning. New starter purrs as she winds down and gets the engine going in one revolution. :) Now to figure out why there is a grind for a split second when I'm over 35 mph and go to accelerate...

Tires an wheels showed, new LED headlights to replace the halogen as well. After finishing all that I go to turn it over and hear the sound of welding. Confused I check the bay and found no damage or burns... So I set up the phone to record as my second pair of eyes. Sparks coming from left...

So I have new wheels + tires showing up for the 1009. 17in wheels with 32in AT tires so I can use it more as a daily driver as I currently have the 16.5 in wheels with the 37in Wrangler 2s on there... Question is this, should I drop the suspention back down? Or leave it at 6in so I can more...

https://www.steelsoldiers.com/threads/fusible-links-101.122571/

Im with ezgn, pull the pan and check that tube. When I got mine it was having similar issues and the pickup wasnt seated proper. That caused foaming an low pressure. Im sure you know this, but just in case you dont. When you add fluid start up the truck and move through the gears but dont drive...

Im not sure the list will ever be completed as there is always being more tacked on... she looks good tho :)

So I got down there and checked it out, first two pictures are the rear shaft and second two are to the front. The front has a bit of wiggle room, as denoted by the separation of the sharipe marker. I also noticed the... boot?... sheath?... whatever was loose however I did not notice much...

Ill probably end up taking it to someone... the more I grind out the rust the more I find stuff like this. The paint is just to keep the fresh metal safe until I figure out if I want to chance fixing it myself, and investing in a MIG. On the bright side, I have a drain to easily hose out the...

Only have had this M1009 for about 2 weeks now, Ive changed all the belts and blood and found nothing other than normal wear when going through with a magnet. I have bypassed the relay and replaced the torsional dampener as well. Under normal load below 35-40 mph (guessing here, spedometer is...

Much appriciated for the info gents. Just wanna know what to do before I am in the situation.

So my understanding of the system is that the resistance in the plugs ect is what drops the voltage for the glow plugs down to 12v... if this is correct wouldnt starting from only one battery not work as there wouldnt be enough voltage, i.e. the 12v starting would be even lower due to the...

Hopefully this isnt too much of a necro, but I didnt feel my question worthy of another thread when this is already here. For clarity, I understand that is both batteries are dead you need 2 other cars, one to jump each battery. Assuming you are on the side of the road, and only one person has...

While I paitently await the arrival of the new headlight assembly, I decided to attack the rust spots. The major bits (such as wheel wells and rocker panels) will just be replaced in the future. Wire wheel followed up with 80 grit sandpaper and rust converter to get all the rust out, then bondo...

New headlight show up in two days, Ill keep that in mind Wednesday :)

First I have heard about this... is there any example differences from one year to the next?

Any reccomendations on where to get a new cluster and dash? Ive seen all sorts all over the internet but have no idea if what is adverised is actually going to work... I defer to yalls experiance. As a side note, they gave me the wrong belt for the driver side alternator and driving into town...

Only just bought it last Sunday, M1009 Changed all the fluids, belts and replaced the broken headlight and tail light. Attacking the rusted out wheel wells and rocker panels when new parts arrive but until then the small bits of rust here and there. I have no dash or instrument panel. I have...