Search results

Very nice m1009. Looks alot like mine. Did you spray or roll your paint?

http://www.steelsoldiers.com/showthread.php?99022-Driveability-of-395-s-vs-NDT-s Here is some info about them both. Simply put No D**n Traction with the dual NDT's.

Carefull with the split rings. You will need new o rings. And so you know the M925 is a 5 ton so please post in the correct location. There is a 5 ton section. This question has been answered before the search function in the top right works great. Im not trying to be a jerk just trying to...

Michelin XMT tires

My uncle sold them they had no tires and no CTIS. They were just rims. He had 20 of them.

I would try to find some for 150 each.

Thank you very much I found this thread and read it

Did it yesterday 18 hours non stop.

Hello everyone, I purchased my first deuce yesterday. My truck has the standard NDT tires on it right now but it came with a set of 395's already mounted on rims. Both sets of tires are like new. Considering that I am new to driving this truck what tires should i put on it? By this i mean...

Do they fit in the back.

Hi everyone, I purchased a m35a2 along with 2 M105 trailers. These are in Alabama and i live in Michigan. I plan on pulling one behind the truck but i need a way to get the other one home. I would like to know what you guys have done. Ive heard of stacking them or loading one into the truck...

First of all DO NOT BYPASS THE GLOWPLUGS. Instead you can take off the 24 volt input to the relay and connect it to the 12 volt block. Same motor pretty much just 2 alternators with isolated grounds. And a 24 volt starter.

Dear Patracy, I appreciate all of your hard work in upgrading the forum. i know that sometimes a little bit of change is good, but i find all of these changes overwhelming. I am not to fond of the new layout. by this i mean it just doesen't feel like Steel Soldiers anymore. I liked...

If you can weld or knows someone who can i would Have a new piece welded in. Cut out the rusted section and form a new piece out of sheetmetal. You could try using structrual epoxy. You should be able to form this piece with a vice and hammer.

Im about 3 hours away in plymouth near ann arbor

Good luck at that price.

Buy a key on ebay all of them are universal. They are a B blank.

Diesels love to idle. My thoughts would be 30 plus miniutes.

I think your best bet would be to order a set of 37 inch hummve tires from trail worthy fab. And use hummve beadlocks they will weld in new centers with the lug pattern and backspacing of your choice. This way it will be military parts. This is what im doing to my m1009

I wish the TM held ALL of the answers. Even to our mistakes.