Search results

I would like a blueprint / drawing to machine the M49 ring and hardware. If anyone knows where to get a set of plans, please let me know. If anyone in So Cal has one I can copy, that would be OK too. Thanks -Ken

I had to do this job; I bought a new (probably Chinese) latch and it only lasted about 25 - 30 operations before the outside handle would not operate the latch. Took me about fifty minutes from walking outside to the truck to having all the tools put away. My assembly had no lube on the two...

Prospector- I see you're in Hesperia- I work in Pearblossom. Hope to transfer down to San Bernardino within the year. I also have an M35A2 w/w that I drive around at least once a month (but not up to the high desert!).

Thanks mike!

Here's the builder's / data plate after I spruced it up: I cleaned it with white vinegar and hydrogen peroxide (about 50% - 50%) and then sprayed it with flat black; gave it a slight curve, convex to the front, and then sanded it slowly with 600 grit emery cloth. Lastly I coated it with clear...

PM and email sent

Hey All: I am currently collecting missing parts for my -A1 project; the blackout headlight is missing, and that's the next item on my list. Can someone post or email a couple of detail pictures of the correct one, or post which assembly if used on other trucks such as the M35A2, 5-ton...

I was thinking the high angle of the tow bar contributed to the problem

FLAT-TOWING TO STORAGE Medium tow bar Wheels turned wrong by themselves, had to have a friend steer it to the temporary place.

Update: I cranked the engine over with the spark plugs removed until oil started coming out of the rocker arms; then I put the plugs back in and ran it. The Bendix reset as advertised.

thanks very much!

Thanks! Looked on YouTube for a few minutes, couldn't find it. Went out into the garage but couldn't get it to retract but I was probably doing it wrong. HOWEVER: From TM 9-2320-218-34-1, page 6-7, "CAUTION: If pinion and barrel assembly are accidentally rotated to fully-extended locked...

M151A1: Is this the wrong starter or Bendix? Hi All: This Bendix stays engaged (makes ratcheting noise when turning the engine over by hand), does not seem stuck, and I've never seen one like it. It came out of the vehicle, not loose. Ratcheting faces: Is it the wrong one for my M151A1? If...

Much clearer than mine!

saved for more additional info

Some paint pics: These are on the inside of the -A1 windshield No hood numbers, original seems to be USMC forest green (I sprayed on some 24087 at top): Guess this hood was a replacement

Hey All: Just got this M151 today and was wondering if anyone would like to say what's on their mind about it. I have restored a WWII Dodge WC-43 and repainted and maintain a 1968 M35A2. I will start restoring this jeep in a few months after I take care of some loose ends and sell the WC-43. I...

Hey All: I will be joining a convoy from Devore, CA to Amboy, CA and am looking for contact info for heavy hauler flatbed in case of breakdown. I know they are out here as I saw them many times at the Gov Liq yard in Fontana, CA but never thought to ask for their info....

So...... Is $450 each plus shipping and possibly tax the best deal for new 11.00-20 tires today??? This price at Coker Tire. I have been buying 12- to 15-year-old tires with like-new tread but they are cracking deeply through the tread and the sidewalls are cracking a bit, too. I cannot afford...

I thought the center caps supported the ends of the drive shafts of the knuckle u-joints (stub shafts); no center cap would allow the stub shaft to whip around and maybe contribute to u-joint damage? I think I would need to bore out the splines on a pair of center caps (hubs) and allow the stub...