Search results

Welcome to the madness! If your truck is well maintained , safe, and it is capable, then set accordingly. My experience is slightly different as my stock 6.2L, 3 speed runs great. I feel very comfortable with my baja tires at 35/40. I cruise the interstate at 65-69 with no problems. YMMV and I...

Someone else who served could better answer as I did not recognize some of the other numbers and designations? It is safe to think it was some type of support medical unit, is my best guess?

I see this as 95% export market so they can keep the slice of the pie they already have. With Spanish, Greek,and Chinese copycats already out there competing for the same $, they need to keep relevant.

807 Medical Command, 330th Medical Brigade out of Ft Sheridan, Il ? http://www.usar.army.mil/807th-MCDS/

Looks like a gp auction listing for tires with the new pricing model.

The red o-ring seems to be the current issue and fits most wheels. It is in the 24 bolt even spaced wheels I have. AMG 12460388 Appears to fit most 12 bolt also. HPG lists it as superseding previous ones. https://www.hummerpartsguy.com/O-RING-WHEEL-RED-1650-RIM_p_639.html...

Croft or E-trailer. It is a common dexter axle.

They do not even understand what that is. All new bill required is basic safety equipment you already have. Windshield, lights, etc. Just use title and register. From what I understand even though bill passed. They will not title or register anything till Jan or when they are ready. Good to...

It is in Purvis, Ms on Hwy 11 next to Lamar Concrete. I had it in my contacts but I am now a few phones different and does not seem to be on my current phone. He was asking $700-800. I was there a month ago after the Rally at Camp Shelby. Peaked in the yard to see what was still there. All the...

I know of 15-20 tans ones still parked in the same spot at a local dealer who must have originally had like 50 m116,m105, and m101a2 and was big into scrapping the 5 tons. The way they are parked some have not moved in the 5 years I know him.

Yes, but actual implementation was 1/19 in the bill. They need to design the plate, produce it, and make the internal procedures on how it is going to work.

depends on location but average $2.70-$3.00.

That is a pretty standard ax. You should be able to find it at old school ace hardware or true value stores. They sure ground the heck on the cutting edge. It is normally not that rounded. If you want just a handle- Vaughn 65363...

Still sitting on the Governor's desk/office awaiting his signature. I am sure they are super busy with the fiscal special session and the $ mess we are in......

Might be an off topic question, But are any new trucks painted 3 color camo straight from factory? It seems everything newer is tan OE from Factory?

20 ft of hose can increase the amount of r134. Are you using an ac manifold gauge set with high and low hoses? You can monitor high side readings with temp charts if you see any increase in pressure but it sounds like you need more refrigerant.

beltfed on ebay has them occasionally.

That must be an early model is my guess. The latest look different and have a different regulator.

an/prc-117 radio data/remote/ programming cable. Uncle sugar pays $300 for that jewel. http://fairradio.com/product/10513-0730-a2/ Attached is Harris Catalog data sheet on the radio.

That set up for the a/c condenser/fans is totally different than anything I have seen. Some were mounted on high brackets over the canvas top and I have seen some more vertical with different brackets from the floor not from the fender sides. Also the placement through the window is different...