Search results

I bought them from amazon. They are made by PMD products and are vinyl. They cover a 43" to 45" tire. For the 9r20 I have plenty of room to maneuver them. They were $40/pair but Def worth the money. They used a high quality material.

Today I Installed my nos air compressor filter and gasket. Also changed my coolant filter and after 500 miles the inside of the filter was mud! Glad I changed it. I'll continue changing it every 500 miles. See how much crap I can get out of the block. Earlier in the week I changed my 9r20...

My 1971 am general m109a3 w/ m105a2 + s-250 shelter. My rv setup.

They work great! If you don't have a load in the back the rear end can float going over large bumps. But they give you a little more top speed and last forever. Highly recommended.

The fogs are tilted quite a but. I'll look tonight and see if they appear blinding or not. I might throw a switch in eventually.

Well it's the first 70+ degree day with sunshine for the year so it's time to get something done on the rv. I mounted up 2 brand new led trucklite floodlights. Wired them to the headlights and they turn on automatically when using low beam. Might get a set in the future that wire to the high...

Thank you everyone for your kind words!

My 1971 AM General m35a2 w/w

Well my parents, girlfriend and myself decided to go to Gettysburg with the trucks at stay at a campground. We took the 109 out on it's first long voyage. Almost 210 miles one way. Didn't miss a beat. Before the trip I had to replace the transfercase because there was alot of metal in it when...

I am looking at options for internet in my m109a3. Once doors are close currently there's no communication with outside world. Does any one have any internet setups on their trucks?

Finished painting the m105a2 w/ s250 shelter. Painted gladhands and new hardware for dataplates. Taking truck and trailer for a spin today so see how it handles before taking the truck out on it's first voyage.

The tires came with new flaps and I bought brand new tubes. I think the 10r20s would be a good choice if you want a little bit more speed at top end. I wanted all the power I could get towing a m105a2 w/shelter on top of a heavy m109a3 to begin with. So I chose the 9r20s. Also because if there...

No issues whatsoever. People have told me that the m109s have a harmonic vibration when driving that feels like a tire is out of balance. I had that issue driving it home. The new tires don't have that at all.

And a few more with a couple night time photos...

Here are the rest of the photos to go with the last post. Photos of the truck were on a drive today with adjusting the fuel.

Tons of progress made since last update. I finished up the floor and got the table, two cabinets and two leather recliners, air mattress and fridge inside the truck. I I got the last coat of paint on the outside of the box as well and installed the new reflectors on the truck. I painted the...

Thank you! I appreciate your kind words. Plan is to finish up the inside and get one last coat of paint on the van box outside and install the pyrometer. Then I gotta paint the trailer to match. More photos soon!

I used an orbital sander for the hood, doors, outside of box. I didn't need to soda blast at all luckily. On the frame and underside of box I used a wire wheel to take off all the rust and old paint. On areas when using bedliner, I didn't smooth the surface. The bedliner will fill...

Thank you for the compliment! You could do that but diamond plate would be expensive with the rhinoliner. But it could be doable. It might not be comfortable to walk on with bare feet. As long as the floor is sealed up nicely with paint and the Mats protect the wood, it should be ok. It...

Great thread so far. Looking to see your build progress! Are you doing a frame up restoration?