• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    Need help with manifold valve on new to me M149a2

    I would consider replacing the valve with a tee and putting ball valves on both sides. PVC fittings would be very reasonable. Some green paint and nobody will know.
  2. NDT

    Hi-lo range

    Seems like you can pull up on the lever 8 to 10 inches. If you are in 5th at 35 mph, you are in low.
  3. NDT

    Hi-lo range

    10 o clock
  4. NDT

    M35A2 gvwr

    here you go
  5. NDT

    Multifuel in tank pump problem

    Fuse is on +24 volt side. It’s possible your tank has 1” of spooge in the bottom, did you check for that? You should be able to hear the pump run, if not, it’s not getting electricity.
  6. NDT

    Need help with manifold valve on new to me M149a2

    McMaster Carr is my go-to for O-rings. Any Buna-N rubber o ring should be OK I would think.
  7. NDT

    Mercedes-Benz M906LA Diesel

    Husky MRAP looks like.
  8. NDT

    Replacing ignition system with new system.

    If all the plugs match up I would try that before cutting wires. The module connector looks identical.
    • NDT
    • Post #4
    • Forum: M880
  9. NDT

    Need help with manifold valve on new to me M149a2

    Valve stem must be rusted in place. Disassemble/soak/clean etc
  10. NDT

    Replacing ignition system with new system.

    That kit is to convert 1960's vehicles to the 1970's "module" system which is stock on the M880. Not sure what you are trying to do.
    • NDT
    • Post #2
    • Forum: M880
  11. NDT

    Lug Nuts - M101 and M105 The Same

    There are lefts and rights!
  12. NDT

    Looking for the female...

    The TM for the AN/UYK-128 calls out the “W” number for that cable and as I am sure you are aware, this stuff shows up regularly on ebay, set up a notification for the cable nomenclature
  13. NDT

    Looking for the female...

    That dummy connector is where the interconnect cable between the CPU and the transceiver is parked when the transceiver is removed for safekeeping.
  14. NDT

    Analysis of Transmission Troubleshooting Results Help

    I would make sure that the shift lever positions are in sync with the internal transmission detents.
  15. NDT

    Any info on Container Dollies?

    Welcome, Use search term "shelter mobilizer", what you have is not intended to be used with 20 or 40 foot ocean containers.
  16. NDT

    Mystery holes in A2 fenders

    This is all I can think of.
    • NDT
    • Post #5
    • Forum: M151
  17. NDT

    Chucky's Worst Nightmare?

    Never saw a dump camper before.
  18. NDT

    Headlights OR parking lights ???

    No.
    • NDT
    • Post #2
    • Forum: M37
  19. NDT

    Object on humvee wheel

    Winch is definitely not the primary reason. Same purpose as M151 M715 etc, you move the rear tie down shackles to the wheel end to provide a tie down point on rail cars, airdrop pallets, C130/C17 etc. That “winch” idea comes from a WWII era FM.
  20. NDT

    Object on humvee wheel

    Is this “winch” function discussed in the -10?
110,879members
165,307threads
2,326,124posts
1,826online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks