• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    New to me 1984 M1010 Engine Question #1

    Suggest you verify 12 volt supply to the solenoid on the injection pump is not dropping out.
    • NDT
    • Post #12
    • Forum: CUCV
  2. NDT

    I got a stupid question

    Goats were manufactured with dot 3 but got converted over to silicone in the 80s like everything else the Army had. Silicone fluid is perfect for vehicles not driven very much.
  3. NDT

    options for unarmored body holes

    Obtain some aluminum sheet same gauge as the body, cut into 1” circles, JB Weld in place from the inside, fill remaining hole with more JB Weld?
  4. NDT

    Log of my M1165. Project Joshua.

    Nice work. We call that a “popout” in the air conditioning manufacturing biz.
    • NDT
    • Post #70
    • Forum: HMMWV
  5. NDT

    Log of my M1165. Project Joshua.

    The silver thing screwed in the water manifold.
    • NDT
    • Post #66
    • Forum: HMMWV
  6. NDT

    Oshkosh AMK25 MTVR 7 Ton 6x6 Cargo Truck

    Don’t forget this is USMC.
  7. NDT

    Need dimensions for 16x16 Military tent frame

    Bryanbdp is the tent material still ok? Uncle sold hundreds of these like 10 years ago, but scrapped all the frames. I have one in that same crate.
  8. NDT

    I got a stupid question

    Well I suppose you could stick your finger in there and see if the fluid has that distinctive old school brake fluid smell. Regardless you probably don’t need to flush the system tonight.
  9. NDT

    Webasto Heater?

    It’s only for engine coolant heating.
    • NDT
    • Post #10
    • Forum: FMTV
  10. NDT

    Webasto Heater?

    On my '98, the heater is parallel with the frame, not sticking out perpendicular. The control switch is in the dash not the option panel.
    • NDT
    • Post #8
    • Forum: FMTV
  11. NDT

    Dead Pilot's M38a1

    I couldn't get mine off either. Been running around now with 69 year old grease in the wheel bearing I suppose.
  12. NDT

    Locating a part for the wrecker

    Try Red River Parts & Equipment
  13. NDT

    2024 TX MV Rally

    Same problem here.
  14. NDT

    Dead Pilot's M38a1

    Well I did, but clearly my memory has failed me, it’s been 37 years since I replaced that plate on my A1.
  15. NDT

    Turbo vs no turbo

    The NA deuce is just fine, leaves a little smoke trail wherever it goes.
  16. NDT

    Dead Pilot's M38a1

    Is the builder plate still on the sponson behind the driver (edit: passenger) seat? Will have paint all over it. This has the serial no on it.
  17. NDT

    Dead Pilot's M38a1

    Nice! Not a 1952 though. A 52 would have the hinged grille and thumbscrew retained battery box lid.
  18. NDT

    Electrical system

    Milspec OEM black rubber insulated wire available at Erik’s Surplus
    • NDT
    • Post #9
    • Forum: M37
  19. NDT

    Hi-lo range

    This is the heavy af T-138 transfer case, the arrow is pointing to the hi-low shift rod. That has to move in and out to shift the Xfer.
  20. NDT

    Hi-lo range

    Yes and there is nothing easy about fixing these. First you need to make absolutely sure the lever and linkage are free. Check that and report back.
110,879members
165,307threads
2,326,150posts
1,491online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks