Search results

Does anyone know if there's a particular way to find the actual mileage on the humvees? I'm assuming there's some sort of scan tool that be plugged into the 4l80e possibly? I'm just a bit curious to see how many mines have since I've been driving the truck a lot. My old Garmin GPS said I drove...

Cheap hose clamp and hose can cause that, I had the same issue until I use the Norma hose clamps

I'm currently on the last part of bypassing the FDC which is routing the hose from the back of the filter to the hydrualic head but for some reason, I cannot for the life of me get the hose to seal up with the fitting, sleeve, and inserts. The question I have is do anyone know if there's a pre...

I know this is a dead and beaten on topic, but has anyone yet recently swapped over to a better overdrive transmission or transfer case that's readily available? If so, please tell us what you had to do and the details to it, how much you had to cut the driveshafts, did you need to move the...

Anyone has the exact size for the driveshaft bolts that connects the rear transfer case driveshaft to the rear axle? I'm hoping I can go to the store right quick and get them instead of ordering some, I lost the original when we removed them for a tow

Well, maybe I should've adjust the steering stops, the pitman arm finally ate itself up inside and left me with no steering

Yep, the m35 has been my most useful truck so far, I just used mines this morning for a complete house clean up job, I had just enough space to fit everything that has to be dumped

I installed the 1/4 plates, I will test drive the truck later today or tomorrow to see how my right turn is, I took some measurements and even with 2inch spacers, the tires would stick out a bit pass the fenders, I will look and see if I can find some 1inch or 3/4 spacers on the market since the...

All I have to say is "What the "

Yea, it seems like my best bet would be the 2inch spacers, that would bring my wheels backspacing from 10.96 to 8.96, that should still let my wheels stay under the fender or flushed

I've finally done my homework on this, seems like the wheels to use are these: MRAP wheels with 7" back spacing 10 bolt 13.187 can fit M35A2 with adaptor plate | eBay they have 7inches of backspacing compared to the 10.9 inch of backspacing on the MRAP wheels I have on. I do have some 1/4 inch...

Yep, reasons why I only just cleaned it, I kind of like the looks of it has seen things

Only thing with the Allison 2000 is the transfer case would most likely have to be moved back and the driveshafts would have to be modified for it, but it would definitely be a better way to go then the 5.13 gearing since your acceleration won't be affected, with the 395s I'm able to do 57 at...

I have the rear cylinder hose re route kit, I haven't actually check to see if it made a difference in the hotspot yet

100% right on this, I've been using this fan since February and have driven the truck almost everyday since then, I can confirm my experience is the exact same

Yep, I should be good with the insurance since there's a cover on ebay that's about $600 including shipping. Yep, got a BRDM 2 in the back covered in it as well, its unbelievable on how much that stuff spread around the whole building, the ceiling is going to be a real pain. I thought about...

Either that or some liquid type of degreaser, I'm finally starting to get tired of cleaning the powder :ROFLMAO:

I got the tire changed today, cleaned off the battery cables, and the truck started up with no problem. Just going to be a lot of cleaning to do

Update from pass couple of days. The claim adjuster said he would contact the department to have the labor cost decreased, this would cause the title to stay clean since it would be under the 75% total loss law in Louisiana. For the storage building, the owner doesn't have insurance for fire...

I mean, I did try roll racing a cement mixer on the highway, I lost badly