Search results

a Silverton Colorado would be a blast . the gravel road out of town is good for a ways is good for all vehicles .and some camping spots that will hold a group with large vehicles . from there there are lots of roads for smaller vehicles . for me it's not far and I would like to help make it...

for best resultes mount the heater on the frame and use the drain on the side of the block as the sourse of coolant . the coolant needs to flow to the heater then the heater can heat the coolant and push it up to one of the cab heater hoses . the key is getting the heater below the water...

The m816 parts truck I have the tranfer case pto runs all the time no way to shift it in or out of gear the gear box that it go's to is what shifts in or out of gear I bought a transfer case pto from Memphis equipment $1400 rebuilt that does shift in or out of gear I plan to use it to mount a...

RE: Re: RE: Might need help in albuquerque I'm in Farmington I have no m35 parts other then some non turbo engines if any thing there is needed and I do have parking space . kenny

RE: Korean Vehicles these trucks are easy to work on the fenders and inner fender come off together by taking out 4 bolts and loosening a fifth the side cover comes off by removing 3 bolts . the head light grill assenbly radiator engine and tranmission can be removed as a unit with out...

I bought a new 1982 chevy 3/4 ton 4x4 with a 6.2 and a 4 speed standard I don't remember what gears it had maybe 410 it pulled good and I put lots of miles on it .

RE: wheel drag then the axle shaft pushed the cap off the hu I would think the ujoint went out on the axle or some thing wrong in the third member . older mack with heavy rear ends had the same type of freeze plug cap and if you broke a axle it mould push out through this plug .maybe this plug...

RE: Wanted - spare tire carrier info for short wheelbase rig The m221 did not come with a spare tire carrier but adding one to the deck should not be hard . (pm) me your adress and I will send you some pictures of my truck and you can get some ideas .kenny

windshelds for a m211 measure 34 1/8 x 16 1/2 or real close to that . I used pieces of windsheld frames from 3 trucks to make one set .what ever these fix it's a good buy for nos.

I found a nother elbow in the shed it may be the one that fits the heater in take the hose end is oval I will ship them this week .kenny

I have part # 6 there are no numbers on it but the holes line up to the ones that bolt it to the side of the hood on my m816 parts truck . kenny

any chance the rear axles are the same ? any water in the third members or transfer case ?

it may be that the teeth on the pto gear and the gear in the transmission are making to much contact and need to be shimed apart . I would take the pto off put the cover back on and fill with gear lube and road test

The m816 wrecker (1985) I bought for parts with the same plan as M52a2 to mount the 45,000 winch to the rear of my 5 ton . any way the wrecker has a pto on the tranfer case that runs all the time the drive line runs to a nother gear box that has a drive line that runs to the crain pump with a...

my 53 GMC gets about 5 it runs good the 302 is said to make 130 horse power but it turnes both rearends all the time and the front is not always engaged but it's turning all the time .high gear running down the road is not direct but a under drive . empty weight is about 14000 pounds 5 mpg...

RE: Re: RE: Cab heater ? for M211 I have seen pictures of southwind heater mounted on the inside fender well just like hippiedude picture the intake is through the hood

the m151 kits work very nice in m211 just make a few mounts

RE: Re: RE: Transfer case PTO on the m816 the lever in side the door is in the corner beside to the rear of the seat. maybe some one will know about swaping pto from 2 1/2 to 5 ton ?

RE: Re: RE: Transfer case PTO checked the 816 the pto on the transfer case has no linkage on it .the drive shaft leads to a gear box on the front there is a shift rail that operates from in side the cab by the door ( in gear or out of gear ) ? out the back of this same gear box there is a...

RE: Re: RE: Transfer case PTO thank you I have m816 wrecker that I was going to tahe the pto off of but it look like it turns all the time with no way to put it in neutral . so I need a pto like the one in the picture that shifts in to neutral and that fits a 5 ton kenny