Search results

Hi Economist--I want to replace my belts also--where did you get your belts and what are the numbers--thanks

I have that noise also--thanks

Found it--Bad left front inside cv joint---I can see the brake disk moving and the shaft is not--when the humvee is in high range the power only goes to one wheel either in the back or front--the wheel with the least resistance gets the power--the wheel that is slipping gets the power--the...

Is there a crossover number for the 4 belts on early m998---the belts I have on the alternator are tight but are jumping---I would like to try gates or napa--do not know why the belts jump so much other then they are old--thanks George

did you ever find out what the grinding noise is--I have the same noise--how did you fix it--thanks

Hi--I need the wiring diagram of the start switch and the starter for the 1986 m998----have been having glow plug prolems and just realized the last owner put in a key switch with a wire going from the switch to the starter selonid--of the 3 wires going tho the start two of them are spliced...

Kevin---what did you do to get the humvee glow plugs working--I am working on mine and have the same problem you had back in 2007---George

I was going to look at it again yesterday but it was 27*---thought I would look at it today but its 17* in NJ------will get back with more info when it gets aroung 45*--thanks members --George

we are talking about 4x4 operation in High compared to High Lock----look at the lable next to the selector for the transfer case--HL-H-N-L-----see the inclosed link and see what the 20 manual says is the difference between HL and H and that is what we are talking about----have you every had this...

go to wall mart and the the cheap spray can of water based engine degrease--spray the foam in your hand and rub it all over the wheel--let it sit for 15 min--wipe off with a towel --repeat a few times and the junk comes off / your hands also get real clean

m998--I was driving my newly purchased 1986 m998 around my back yard--It has 26k miles --I was moving at aprox 10 mph in drive and the t case was in high----after going through a 1.5 foot deep depression with the drivers side front tire a very loud popping and grinding sound could be heard --the...

Thanks--I have wanted one for a long time-- I did get one at the Bishops Brothers Auction in Alanta years ago--Same price--There have not been many for under 17k--Anything over that and it is just to much for me--------I will ask Kevin about shipping

Need humvee shipping from Max Meadows VA to jackson NJ--Any members have shippers they can recomend--Thanks George

Bid on a M35a2 from GL--Scrap value is around $1300 as of jan 2012--Bid up to $2500--You may get something great or loose $1200--Have some real fun--you could get lucky

Good purchase--I bought one in 1977 that I got from Lakehurst Naval air station in NJ--The truck was complete wth winch, racks, bows and canvas--I paid $1650--It looked new but had a wiped out cam--Turns out they all had soft cams that wore out fast--My big test drive the next week was from NJ...

ended up getting the airpack from a SS member for $125---very luck air pack--only had to be near the truck for the brakes to work

Sent an air pack to Marlene to get the truck moving about 2 weeks ago--Since that time the brakes started working with out anything being done--The air dryer developed a constant leak not allowing the tanks to air up--the dryer was bypassed and everything seems o to work--

I ordered an air pack from Sam Winer--new--$295--Will report back once installed--adjusted the pedal linkage with no change

We did some diagnostic work on the A3 today--The brakes lock up at the first push of the brake pedal--The truck was placed on a hill and was rolling down the hill in neutral with the engine running and the air pressure up--tha brakes were applied and the truck stopped-- when the pedal was...

Marlene bought it from me off Ebay--I purchased it in April --it is out of Fort Mead MD--My cost $4800 from GL plus 10% buyers fee plus 7% tax plus $100 title fee into NJ title plus $600 shipping to my place plus $100 ebay selling fee plus I paid $200 towards the shipping to Marlene--my cost...