Search results

wow, i will bookmark that site, its got lots of stuff, and cheaper than grainger

or do those have blind nuts?

Is this the doomahicky? I get mine from Grainger, called a sheet metal nut. pn 25wn42 for a 1/4" x 20

So, the air goes thru the solonoid, then thru the body to a metering hole, then in a chamber where the baffle is, the air pressure pushed on the flexible baffle and makes it vibrate as the air pushes past to make the sound. Same thing like a brass instrument, the player pinches his lips together...

sounds like a baffle broke, will go get some pics to do a write up

trailer weighes 2000lbs, genny weight is 3000ish, fj cruiser is rated at 500lb tounge and 5000 total, so you are maxed out. I would err on the side of caution and say ship it.

Some of the air elbows or T's have small screens in them before they go into major assy's like a spider valve or check valve. Had one that took forever to release the brakes after the button was pushed, had a screen at a spider valve clogged up.

831 doesnt require batteries, or a charging system or a starter to run and produce power, its an inverter style system. Also have not found a original part. I am all for being a purest, but if you cant, then adapt.

Used the gauge on a load test for a little 831a, worked very well. Also installed 2 of these on my RV 7.5KW since my wife spent 1900 smackers on an inverter that was smoked because the genny was shut down with a load still applied *not me for once* ps an 831a will turn 26amps for atleast 10...

It came with 2 motorcycle batteries, but I have a concorde that needs a new home that is good, so I will send the Concorde with the genny.

Didnt see anything out of the ordinary, caps not bulged, mov's looked good, all zip ties in good condition. When I say faulty, it only puts out 24.9v, that would take along time to recharge a battery.

Thank you for verifying for me. Its not my genny so I want it to be as user friendly as possible.

I am working on an 831 that has a faulty battery charging regulator, has anyone used a NOCO g 7200 in place of a bad battery charging regulator? Do you have to push the button everytime to select 24v when 120v is applied? All of the video's show that you have to push the button to select...

What are you looking for? The cable or the tail?

Well to get her to put out, might want to give her a name, and take her out on a date first.

I used a Gates 26391 hose adapter and a piece of 1 3/4 hose,gates 24028 to rebuild a donkey dingy, it took a couple different cuts to get the length of hose right

I am pretty sure you are beating a dead horse on trying to save the batteries, BUT it is always worth a shot. Slowly discharge with a low amp draw like an old incandescent headlight or marker light, then when you start to recharge, use another good lead acid battery as a buffer between the...

yeah, i ordered mine then like 2 weeks later I get an amazon popup that says, 'you might be interested in this' and it was the same one that I ordered. I think they watch alabibi to what we order, then list that stuff on amazon

I ordered 3 of these from alabibi last month, they should be here this week, hope hope. have 1ea for all 3 legs of a load tester, if I like them, then i will get 6 more, 3ea for 2 genny's I wanted as much info as i could for each leg to help diagnose any unforseen problems...