Search results

You might try contacting Justin Wehring down in Angleton, "wehring" here on Steel Soliders.

If you want to come into downtown Houston, you are welcome to borrow mine. Note that most of the ACE hardware stores have good solid 1" OD, 3/4" ID bushings that are just the right length to use with 3/4" pins in the 1" holes.

Woo-Hoo ! No conflicts this year ! (At least this far, hopefully my son won't get any as the semester goes on...) Just in case anybody asks, here are some links - Last year's thread - http://www.steelsoldiers.com/showthread.php?134441-2015-TX-MV-Rally The museum's site -...

More Pictures - https://www.nasa.gov/image-feature/historic-formation-flight-of-nasas-wb-57s-over-houston

One of my friends at NASA is a back seater for the WB-57s. He was loaned to the Air Force and stationed in Saudi Arabia for about a year in the second gulf war (2003) along with the WB-57 that usually lives at JSC. (Most of the pilots are Air Force on loan to NASA, so it was an interesting...

I've got the same setup on my deuce, and have the same rubbing, slightly worse on one side then the other. I did a little investigating with re-painting the bolt heads and am 95% sure rubbing only occurs during full lock turns, which will leave the rear tandems visibly misaligned (sight along...

Sadly my son and I will miss out this year. We've had a couple of possible conflicts on the calendar for a while, and he just added two new required activities for that weekend. Have fun and post lots of pictures !

Yep, $50 dollar light, $1750 worth of paperwork - source control documents, inspection reports, structural analysis, transfers, design reviews,... If it were for one of the NASA projects I work on it it would be the same $50 light, but $175,000 worth of paper !

TMs for M917 dump body Or not, maybe a moderator can add these (they came from Logsa {which appears to open to everyone again, Yaaa!}, liberated manuals, and a google scan; all appear to be unlimited distribution). The lube order is just a partial, all the other versions of it I found only let...

I found the four following manuals dealing with the M917 dump body, but no MWOs. I'll add the manuals to the manual's thread. http://www.steelsoldiers.com/showthread.php?121484-TMs-for-M915-to-M920-Series-trucks LO 5-3805-274-12 Dump truck body M917 NSN 3805-01-028-4389 TM...

Welcome !

ke5eua, I have to respecfully disagree with your statement. From the TxDOT Commercial Driver's License handbook - Different Classes of Commercial Driver Licenses There are three (3) basic types or classes of Commercial Driver Licenses. They are described below. For further information, refer...

And know that if you want to pull a trailer that is rated to more then 10,000 lbs that will bump the license requirement from Class B to Class A. mkcoen - Do any of the RV places rent (and you'll need a driver) for the tests? I know there are some truck rental places here in Houston that will...

http://www.steelsoldiers.com/forumdisplay.php?120-Trailer-TMs At the top under "Technical Manuals", then the trailer's forum. You're looking for TM9-2330-213-14&P, M103 and M105 series trailers.

Erik's for parts. Or NAPA or a bearing supplier may have some of the parts. Here are some useful threads. Since you have to open up the hub, it's a good idea to do a general maintenance while you are in there. http://www.steelsoldiers.com/showthread.php?8460-Front-axle-seals-and-boots-stepXstep...

Welcome !

opps, wrong diagram, needed the one after the instructions...

The only time I run out of air with my air assist is when parking the truck in its spot in the back yard, there is a bunch of lock to lock back and forth to get it tucked into place, all with the truck basically at idle. A couple of times I've used low range and run it mostly at higher RPM and...

Congrats ! I saw a 915 with an LMTV on it last night heading the other way on the way home from work and wondered if it was you.

This weekend at the museum of natural science, big WWII display out front. The were setting up as I just rode by tonight. http://blog.hmns.org/2014/05/memorial-day-houston/ The half track was out.