Search results

Can you post a link for the camera system

Thanks for the reply. How high is your landing from the ground? It looks like the Tork Loft A7506 is a 6 step stair but from the photos it looks like yours is a 8 step. How did you get the extra steps and supports?

Who makes the boarding ladder, stairs and landing, and where did you buy it

Your options are Changing the Lunette on the surge brake to the adjustable height one And adding air bags or an ad a leaf to the M1009. The problem with an ad a leaf is the truck will ride harder empty Another option is replace the springs on the M1009 they probably have sagged over the years

need 15" wheel for my 3/4 ton tailer You can change the Lunette on the surge brake to the adjustable height one You can also look into airbags for the truck

If you look at this picture it does look like there is room for the paper clips with the hood open

102" is the new limit

This is common on water trucks because the operators want more comfort but the 5 ton chassis works great

Now you need to get rid of the black bolts and nuts

You will have better luck stopping buy the smaller places and asking if they have any scrap or oops unbolts for your display vehicle. Even new unbolts are not expensive.

The used truck u bolts that are in my pile are 7/8" Dia 3 3/8" inside dimension A truck spring shop could probably bend what you want or you might get some old unbolts for the asking

We use old truck unbolts What is the inside dimension between the 1" bars?

I was taught to drive by floating gears and downshifting do an almost complete stop, twin stick Mack usually running about 60k on three axles. You are not driving a car, you are driving a big truck. When properly set up an Allison will downshift to a stop but the engine must be running.

You need the correct tow vehicle a tug, tractor or cat.

Does the trailer use leaf springs or torsion axles? Is height going to be an issue with a camper in the bed? Think about how you are going to load the camper into the bed. Any bump in the road that the truck slams my air ride seat can not be good for a travel trailer. There are quite a...

My Hi-Lo has a steel trailer frame and the box has an aluminum frame in both halfs, mine is smooth sided and a classic model There are older ones and light weight ones with wood frames in the boxes

The trailer frame is part of the camper and can not be removed. The axles and suspension unbolt easily I have a Hilo camper on my 15 ton. The harsh ride of the factory 5 ton suspension will shake a camper apart You have several options Leave suspension on the trailer to reduce the...

What time on Saturday

You need to avoid the ultra light weight wood framed trailers. HI-LO trailers are not perfect but they are better constructed than most trailers The key to keeping it together is to lessen the vibration and shock that is transferred to the trailer. I went through a lot of designs. The first...

The 44k rating is for the tandems, two axles, so each axle is about 22k. The steering axle will be reduced due to the kingpins