Search results

Those are what I have for my MRAP setup but with 3/8" adapter plate

I went with a 20x10 steel MRAP 2 piece wheel. I only ask because I like the look of the (dished out) option but wasn't sure how much of a difference there would be if I didn't flip the hubs

Has anyone with super singles that haven't flipped the hubs measured the distance to see how far off the track was between the front and rear? Thanks

Eastern kit does not include turbocharger either does Big Mike's kit. Yes I love my truck but want the added sound

Hi everyone, I have a 66' 2.5 ton and I'm wanting to put a turbo on it. I've done some research and found a kit from Eastern Surplus for $450 plus shipping. I know I've read quite a bit on here that they can be a hit or miss and that people don't like to order from them. Now has anyone ordered...

The number you gave is on the box a little blurry with the pictures from uploading but clear with original picture. I thought it looked like it had the right style of clamp holding the halves together. I appreciatethe info. I'll have to see what other gurus come up with as well

Seller for the NOS turbo did mention it had 11 exhaust blades as well

I have found "good" running used ones on Ebay as well from a reputable company( C&C Equipment) NOS $800 o.b.o with $100 shipping. Used $650 o.b.o and $41 shipping. I've been debating on which route to go. I'm not very familiar with these turbos and their lifespan. So I was thinking if I did get...

Hello everyone, I'm currently looking at adding a turbo to my 66' m series truck. I have found a NOS "Whistler" turbo on Ebay but was wondering if anyone from pictures could help identify if it is a Whistler c type. I asked for more pictures but he doesn't currently have them due to selling...

Hi everyone, I'm currently in the market for a Whistler turbo for my 66'. I came across a NOS on Ebay and was wondering if anyone could tell if it was a Whistler turbo from the pictures? I asked for more but he said he didn't have any due to him selling the one that was pictured and has 2 others...

Fuel Neck Strainer Info. MegaCorpInc. (New Mexico) # 1-800-345-8889 $72 plus shipping Part #308466

Dimensions: 6" long x 3 3/16" wide with a 3 3/8" wide flange. It was $70 plus whatever shipping is

I'll see if I can come up with a link. I know when I searched their website with the part number the item didn't show. So I just called and they were able to pull it up on their end.

Hi everyone! I wanted to share my experience with the fuel neck on my deuce and help anyone if they have had the same issue. I have owned my deuce for about 5 years now and would clean the strainer regularly. Last month I added some fuel and wanted to clean it but noticed the filtering material...

Hello I'm going to swap my t-case over to an air-shift soon and I was wondering if any one has any pictures of what the mounting bracket looks like for the air switch on the dash? I'm going to try to buy one or see if I could make one. Any help would be appreciated

Thanks for the information. I will take a look and see if I can come up with somethingand will let you know

Looking at switching over to super singles and have been doing research and have found most adapter plates are minimum $100+ a piece. I have access to a cnc mill and didn't know if anyone had a good drawing or cad file that would work. Not sure how much money I'd be saving or if it would even be...

I put a heater in mine from summit racing. Just under $200 and I installed a 24v to 12v transformer to run it. Works good enough for the winter driving I do especially with how poorly sealed the cab is with a non-insulated vinyl top.

IN

Have not ordered them yet. Assuming 3/8" thick.