Search results

Your oil stick will work with that tube. Tube is for a 400 amp installation, but will work. Dipstick 12339847 & tube 12339147-2 are used with a 400 turbo trans.

Fab shop I use can do any metal work. send me info to get a quote.

I don't think they use I...so oct.4 99....GM block, not GEP optimizer.

If you like the military look...Then Vic-3 is the best system.

Nice list. Here's some updated info : DB2831-5079 is 6.5 turbo,...new # 6282 DB2831-5209 is 6.5 De-tuned,...new # 6278 DB2831-5149 is 6.5 NA , ...new # 6277

I'll have a 2 man system shortly. Vic-3

Sounlds like air in system.

Hmmwv standard heaters only have round outputs. If you need a replacement fan motor...Wanted is a good place.

Ebayyyy is not the only place for parts...Wanted post here is good.

12v .....will burn up. OEM is best....and also available cheaper than fleebay. Put a wanted add.

Originals are not hard to find. I have replacements

A2 harness will need mods to mate to a turbo eng. harness. Body mounts are the same on A0 to A2 early. Later ECV / REV trucks have the purple newer mounts....same size, they don't compress as much as rubber ones and they add a 3/8th to 1/2" spacer between mount top and body for turbo trucks. A/C...

Connector is MS 3106R14S-6s Total length 69''. First breakout is 48" with 3 wires : 27N male, 27M female, and 57L ring lug. 69" end : 2C is a ring lug, and 2B is a female.

Tach hooks up to Alt. If the tach has the round connector. Only the buss bar tach hooks to the tach drive, which you don't have or need.

I have these for the standard silver bearing and the thicker black bearing....takes 12

No, unless you have an Ambulance harness.

Here's the connector : cir030rv-14s-1s-f80 They are over $ 68 on net, and might have to buy sockets extra and they are crimp type. I have a used one with 8" of wire sticking out. You can splice on to it. $ 30 shipped

I got new starters

Antenna bracket on fender.

Heres a snap of the video he sent :