Search results

The mk FPU has a duckbill on the rear to mate into a socket on the RPU

The CORRECT answer is ANY armor that you CAN AFFORD

Just remember that a 939 pcb WILL work on a 809 series, a 809 series pcb WILL NOT work on a 939 series,, If I had pcb problems I would just get rid of it, its main purpose is to keep a young driver from starting the truck in gear and if it is already running. replace it with a high amp solenoid...

When you install the new pump, use a LOT OF ANTI-SEIZE on the bolts as well as the SEALING GASKET, if you do not, the sealing gasket WILL gall when you adjust the belts which in turn will cause a leak and the ONLY way to fix the leak is to pull the pump and start over with a NEW sealing gasket.

NO, I would not tow just the FPU, It will want to nose down EVERY time the brakes are applied. the tow brackets are mounted low, also the CORRECT tow bar is the LVS tow bar, do not think the steer axle will steer with the tb. Also for whoever said that they were going to put a FPU on a trailer...

That most likely a link to "I love my wife's Jag." web site.

What would be the chance of finding a OLD air stream trailer being it has a very close resemblance to the K19, so the K19 could be made from it.

Just so everybody knows, the 939 has the front axle air shift so these hubs WILL work as intended, installing these hubs on a 39 or 809 series 5t, they WILL NOT work as intended because these trucks have a sprag (over running clutch) transfer case that engages the front axle if the rears have...

Spade storage, need to work out where to put the spade poles. As a side note, I have another set of spades (no poles or pins) if anybody is interested.

The GIMP can help in turning it over, he has a lot of experience.

The behind the cab winch should be another front winch, transfer case driven, a m815 would make a great tractor with its longer frame.

Will not have a complete paint job, only paint to blend in. Pictures of the whole truck is a bit hard to get at the moment, can not get far enough away, it is not like i am taking a picture of a itty bitty 5t.

Work now.

First bed fitting 0 Clearance at crane mount. Plan A deck layout. Plan A deck layout, I got looking at plan A deck layout, when I realized that if you were not a midget (anybody under 6' in this case because the deck is 5'3" above ground level, then the lower lip of the box is another...

That is the idea, I did not want a new look, but a MOTOR POOL shop build look, I think I have achieved that look.

I see some with GREAT wisdom changed the title.

This is the reason why most of us have our trucks, there is no need for a use.

1 -- Tent is to small 2 -- Tent is not at MY ao 3 -- Tent has rock for a floor, not concrete 4 -- Ect. 5 -- Ect.

Details, details, details, and everything had to go though a design phase, build/fit phase, install. on the mk15a1, the crane was about the last item set on the frame, on BART the crane had to go first, even the rear winch can not be even placed till the crane was installed because the forward...

When I saw the title, I figured that you could get Bruce Jenners, He, she, ? does not need them any more.