• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. P

    MEP005A 5volts only

    So what would the next item on the list be? I just don't see it being the generator itself because I have no battery charging either. What areas do we need to focus on that would put both out of commission?
  2. P

    MEP005A 5volts only

    Q2 checks good.
  3. P

    MEP005A 5volts only

    So what your saying is I need an out I broke out my power probe and put power and ground to G. It won't switch to allow continuity. I didn't mean a short. That was my fault. I have to do Q2 tomorrow. What I'm saying is that G I have to do Q2 tomorrow. My wife is getting upset. Lol
  4. P

    MEP005A 5volts only

    So this So this Isn't a diode? And yes, it is functioning the way it should as stated in the test. But like I said. C and G are not blocking as you say it acts as a diode. I have continuity both directions between C and G.
  5. P

    MEP005A 5volts only

    After It works as stated by jumping a A and G. But it works both ways because C acts like it is shorted to H. All I'm doing is jumping A to G which is shorted to C. With test leads switched on both sides. There is no blocking when jumped.
  6. P

    MEP005A 5volts only

    Ok. Now should I have continuity between C and G?
  7. P

    MEP005A 5volts only

    JAN2N689 NSN 5961-00-226-8697
  8. P

    MEP005A 5volts only

    So I take the the threaded portion would be anode or cathode? Either way i get nothing across except by testing both legs. I take it this one is shorted out?
  9. P

    MEP005A 5volts only

    Oh and 16 ohms on T1
  10. P

    MEP005A 5volts only

    Desoldere Q1. I got 167 across both legs. This diode has two legs unlike the others. If I did this right., then it's not blocking properly.
  11. P

    MEP005A 5volts only

    All the diodes are blocking properly. CR1 613, CR2 571, CR3 500, CR4 514, CR5 586, AND CR6 589
  12. P

    MEP005A 5volts only

    Ok. I have to continue tomorrow because it's date night and I need more solder. Thank you for your patience I learned a lot more today about DC and now am more confident with this machine.
  13. P

    MEP005A 5volts only

    Yellow I get 4.7vdc. Green I get .1vdc . And red is 2.5vdc.
  14. P

    MEP005A 5volts only

    51vdc
  15. P

    MEP005A 5volts only

    When I do it this way I cannont get voltage below 100.
  16. P

    MEP005A 5volts only

    Test one is a pass 21.5 vdc
  17. P

    MEP005A 5volts only

    I never worked with AC. Only DC
  18. P

    MEP005A 5volts only

    100w 100ohm
  19. P

    MEP005A 5volts only

    And this wiried correctly? Wire from th wiper attaches to pin A and my green ground wire to pin B.
  20. P

    MEP005A 5volts only

    Does it matter which side of R2
110,897members
165,315threads
2,326,244posts
1,477online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks