Search results

I have air filters that are the same length exactly, diameter in 1" smaller for better air flow. Photo comparison to original in my photos, in parts file

I cant give you an exact height, when the tap measure got to 14' I stopped measuring. Since this photo has been taken, I have removed the 14.00/20's and put on 11R24.5's, I lost about 1" overall height. I need to move a box trailer around this weekend, I will use 'Rock Chucker' and try to...

When you get your new screen you will have to replace the metal back from the old screen to the new screen. Reason... there is a heater on the back of the old screen that was glued on and I couldnt get off. It was simple, six itty bitty skrews and 4 bend tabs. Also including a photo of the pn of...

Luckily, I do have another 805B with a very good screen, looked new to me, so now to just find a computer nut to pull the fill out of 1 and put it in the other.

I had no clue where New Boston, TX was..... to my surprise.... its Hooks.

I wondered if there was a different driver for the different screens, only reason I got an exact pn replacement, see if that helps things, if not.... well i have a spare screen.

I placed mine control panel to the rear, thats why there is a platform there so why not use it. With the trailer not hooked up to the truck, do you have to have the rear legs down with this setup to keep the balance correct with you standing on the platform?

I dont know why either, take 2 bolts out, roll the shaft, take 2 bolt out, roll the shaft, take 2 bolts out then roll the half shaft off the rotor. But his initial question was about getting the brake cable off. I know I get side tracked while doing a project then end up forgetting what I...

there is a C clip that holds the brake cable in the bracket.... item 7

delete please, double post

I did replace the screen with a China version but now I get this screen if you cant read it.... it says 'Unbootable device available r- reboot s- setup esc- bios debugger' I did not use an exact part number replacement, the one I used was a direct replacement. So I ordered an exact part to...

I have not had a response or had time to play with green iron. If you don't mind taking a measurement for me. I either have money and no time or time with no money

Need an unlike button for the last comment

If they are only $10 each, 25 wouldnt be that bad, then you could be the go to guy for keypads, double the price and you get yours paid for after 1 sale.

http://www.liberatedmanuals.com/search.mpl?q=M998&Search=Search 9-2320-280-20p

I worked on some equipment that came out of long term storage, and we changed alot of the gaskets on the top of the tank. In the parts photo, the item is #10

I have the gas version, its only rated at 4.2kw, and it is used for a ground hop kit to start AeroCommanders and TurboCommanders. This one is in NC at the present working on those fires over there.

No teaser, it was just dirty, so it looks camo. The crane is green iron and has come in very handy on alot of jobs.

I guess most of mine will be a mix of civi wreckers and a crane. Just about every big job we go on, the crane goes too.

Is this thread only for green iron wreckers?