Search results

The FMTV transmission does NOT have a "built in transfer " it HAS a drop box, which drives the front/rear axles, in normal the tractive output is 30% front/70% rear, with the trans in off road mode which is a MANUAL down shift to 1st, the tractive output goes to 50% front/rear, the FMTV is a all...

915 HAS 2" king pin

The stock deuce rim will be to narrow, my m819 that has 1200x20s oe, calls for a WIDER rim then the stock 5t rim,

I am in Gainesville, GA. if anyone is headed towards Dry Creek, I can grab it and hold it at me AO till the ride west.

[/COLOR] Thank you M16ty, This brings up another subject SIGNALS, there is a standard set of crane signals, it is nice to get those BUT that is asking to much to ask for every body that owns a military wrecker to learn the proper signals, WHAT is needed is that both the lever puller and the...

Most of the guys that buy the military wreckers, buy then because they are cool, or to lift stuff, but have NEVER run a crane before, So if you think you might need to set the outriggers for a lift, pull the needed ones ALL the way out and set them tight where they are taking the weight of the...

Wow thank you, thank you , thank you

Yesterday I got thinking (I know that tends to get me in trouble at times) Houres (not spelled right) a rally vender pasted away just after last years rally, he had been a supporter of the rally since about the first one, when not a lot of people showed, where he may have not even broke even, He...

We had a M62 that started pulling to the right, at first not a big deal, just kept getting worse till it HAD to be fixed, I did EVERYTHING I could think of, even posted up on SITE, looking for answers, still nothing better, just worse, had the brakes so tight that the truck would not roll down...

THANK YOU and WELLDRILLER

Being that one is not in the site library, does anybody have a PDF of the -20/-20p and the -34/-34p (what ever the Marine equivalent is) for the MK15/15a1 that I can get a copy of. I have the -10 but does not tell me what I am looking for.

Check your inner hub seals on the front, look at the LEFT

OR what is the red button for ?, what is the trap door thing in the floor by the drivers seat ?, I started my new truck, I can not figure how to turn it off ?. statement "I have NO brakes" question "what is the master cylinder level" answer "did not know there was a master cylinder, thought it...

Yes in the crane world we call it a becket, there are all kinds of beckets, wedge and socked is just one, think bulk is not a bad trade off to get going in about 5 min.

Read the -10, if you do read it, you will be SURPRISED at ALL the little tid bits of info that it contains, which makes the owner smarter.

Still some slots open, so far 2 - 923s, a 931, 819, 1009, 1070 build

I have done 5Ts using just a hose clamp, in fact think on the first one I used tie wire, wiped it a few times, twisted, pulled, twisted, done, a lot faster then even a hose clamp, If I ever replace mine, I will use a wedge and socket, in the field, a wedge and socket will get you back in...

Would make a nice looking two axle tractor.

A 939 box WILL work on a 809 series truck BUT a 809 series box WILL NOT work on a 939 series truck.

That would BE GREAT in my driveway, right next to my 911, because If I COULD afford the m764, I COULD afford a m911.