Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Under those conditions I would expect the fan to come on yes. Are you saying it comes on otherwise or only didn't during snow? During short intervals and low demand (low throttle) it might be clutched in and you can't hear it. The clutch allows the fan to be driven at engine RPM, a direct...
When I was searching to replace my dead 6TL's I didn't see NAPA. I would have bought them, as I have a good relationship with them. Wish I had known.
On to other responses:
I use group 31 like many, I cram one in sideways, and one in longways and so they wedge each other into the compartment...
Congratulations on finding the problem. I think all of us at one point in time have gotten frustrated trying to start a vehicle, only to find out it was not in neutral or park. Good on you for keeping us updated even if it was a little embarrassing. In the end we are happy for you!
Bulldogger
As someone who works in the energy field, my first reaction is that your house and garage need SERIOUS energy efficiency attention. I live an hour from you and my gas bill was $100 last month for a decent size 4 Br house. Admittedly, I do not heat my garage with gas. While adding insulation...
Saw this 2 man at a winery in the mountains of Santa Cruz today. Closest I can get to doing anything w a HMMWV since I’m across the country from mine.
Bulldogger
I think I hit 67MPH once, but I drive 60-62 on highway. Right lane and left hand ready to flip on flashers. She ain't a speed queen fer sher.
But as many Jeepers say, "Sure yours can go faster, but mine can go ANYWHERE"
BDGR
Another useful tip is to tell the auto parts desk you've got a xx year (your year) Chevy Suburban with a 6.2/6.5 diesel. Most internal parts and filters are identical. Do bear in mind that it's a 24V systems in the HMMWV so glow plugs and other electrical are not the same, but you can ask...
Took the boys to the playground and then used the last of the sunlight and warm weather to test fit my Mk1 soft slant back that is shipping out to Jeffy777 this week. Happy with the fit.
Bulldogger
Get under there and yank on them and try to push the unions apart with your hands or small prybar. The nut and taper will not likely move, but if the taper shaft comes out of the socket to any noticeable degree you have a worn arm which needs replaced.
I can't find if you mentioned the year...
Grab the TMs if you haven't, and do the LUBE Order, regardless of what the previous owner told you. If you don't know what that leak is, one is tempted to conclude you haven't gotten intimate with the details of the HMMWV's peculiar drive train. It's peculiar, but straightforward, anyone can...
I had good luck with convertible top window cleaner and I stitched both the zippers in my front soft doors back in, having gotten them cheap in that condition.
A speedy stitcher is a nice to have, but not essential. The thread used in the originals is not so heavy as the wax twine used in...
Exactly. I was going to type that too.
Check your tire pressure. Unless you’ve got other problems, I can’t think of a reason why it would be bouncy at 35mph. You can fill to 30psi or so if you’re not off-road a lot. The manual is 22-20, but that’s off road.
Have you opened up your geared...
Glad to help! Mine is holding up fine. I have no worries about it. Even if I have to destroy it to get it out, for some reason, I can go three blocks to Advance Auto and get a new one 12 hours a day.
BDGR
I tooled around in my m998 for a couple errands. She fired right up in 25F after ten seconds time for the glow plugs. (Two seconds longer than normal.). Drove fine and brought me home safe. Chilled though. I think I need to flush the heater core.
Bulldogger
As you can see from the painful replies, it is always something coming up on these rides, but they make up for it in other ways.
Welcome to the club.
BDGR
Yup, pretty common.
When this happened to me the advice was to just find an NOS surplus halfshaft, rather than mess with pulling the old one and dismantling it to put on a boot. It is MUUUUUUUUCH faster to replace the whole thing, and when I needed mine they could be had for a reasonable...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!