Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Hi
Gentlemen, I made a mistake in the title. I replaced the voltage regulator not the alternator. I have a 60 amp unit. I will check out the 5a wire. Also I did not adjust the screw. Is this to adjust the voltage output?
Ken
HI
Replaced the voltage regulator and brushes but still in the yellow. Measured voltage at the voltage regulator with her running and measured 24 volts.
Question? Am I reading just the battery voltage at this point? Is there a way I can measure just the alternator output?
Other ideas?
Ken
Hi
I have added a regular trailer hitch to my Humvee . I have it wired right now for 24 v but want to change it to 12v . Not sure what would be the best way.
Need ideas.
Ken
Hi everyone
I haven't had time to do all of your ideas witch I will be doing. I did drive into town today, about 25 miles and the gage went into the green for about 20 minutes. But when I stopped and started again it was back into the yellow and stayed there all the way home. When I got home, I...
Hi
Ok, with the batteries charged up and the engine running, my volt gage runs in the middle of the yellow. I added leads across the gage, and it is reading around 22 volts. As I drive her the gage will run down to the bottom of the yellow and still read about 22 volts.
Is there a way I can...
In regards to using a frost plug heater, I tried three of them from Kat's. The first lasted about a year and a half, The second about four months and the last about three weeks. I made sure the element was not touching the block on the inside and it was never on more than a couple hours.
I...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!