Search results

Well kinda right only the wreckers are listed at 90 psi all others are 70 psi. Also the TM can be wrong occasionally, check out your wheels before putting that much pressure in them guys and I will check on this with CSMS and see what they say.

Any reason given for not on the rear also?

Yeah but my rails won't be touching eather

There was a white top army huey at Camp Shelby until they got the Blackhawks.

What is the S250 floor strength if it is not supported from underneath? I am wanting to put one in a bed that it will ride on the sides not the floor or will I need to support it underneath?

Thought I would bring this back up because me and Patracy were talking about air ride.

You might think about the rear also it will ride so much better.

Try just adding a bag to a full pack and see I think you will be surprised.

Does the truck have air pressure when you are trying to get it to change? If so bleed it all off and then try if that doesn't work take the interlock piston of then try again.

A lot of the 1008 had gov - lock in the rear and many were changed to the Detroit in service. All of the 1028 had Detroits.

Okay longest over land and this is just the deuce miles not the owner which would add 9000 miles. The truck went from Camp Shelby to La Grange TX back to Hattiesburg then to Anchorage AK, so about 6000 miles in a M35a2c w/w.

No, no, no, please don't put 100 psi in 939 A1 or A2s the wheels are not made to handle that much and may catastrophically burst and if not the o-ring may fail. I know because I screwed up and did it and got lucky only my o-ring failed. Look up large tire cage on you - tube and you won't over...

Dear Blackmagic94 I am sorry but your source lied to you he doesn't have an exclusive, I would love it if you could buy an exclusive batch of trucks like that but sorry bud it doesn't work that way. And I have made those types of offers before and moved thousands of military trucks. The best he...

Good deal bud most people just read the sidewalls but the 939 series wheels are only rated for 80 psi.

Vintage iron I agree with your pressures on the 177s but not the 14.00s the wheels on most of these are only rated at 80 psi.

Would add a second tank in place of the toolbox and use the dual tank plumbing of the tractor or wrecker, the gage can be setup the same.

As cannonfodder said as long as it is straight through it should be fine, I have some of the exhaust extensions and they are about 15' long

If you add 1.5" to the shaft you will end up busting your transfer case. Here is why you said your slip was in 3" now add 1" for 700r4 plus 1.5 that you are adding to the shaft, that's 5.5" into the transfer case. I have not measured one but if memory serves the slip yolk is only 6" the stock...

Yes you can do it and it is done with spacers.

We are going to try eat at 12 and bring whatever you want to go with burgers, probably 20 people.