Search results

I heard that they closed there doors the first of the year

Nice I have always liked the jeep fire trucks Is the rear step missing?

That would be interesting. This 800 watt system cost $ 4,000 and would cover the roof of the shelter. https://m.northerntool.com/northerntool/product/detail.do?itemId=31650&categoryId=&path=&productName=false

Pete I emailed you the S-280 manual and drawings. I was thinking about mounting the roof vent and possible AC unit on top of the existing hook drop plate. This is both for structural and elevation reasons. As far as power goes my unit will primarily be ac powered at this point. This is due to...

What are you planning for the HVAC? Where did you get the cassette toilet? What are you planning for the electrical? Is this shelter an S-280? I have started to convert an S-280. I will have the outside painted in time for tower park. The interior will be finished this summer.

Air actuated clutch. Put the controls on the shifter lever. Add a air cylinder in the linkage. You will need to add an air source. It really does not take a lot of force or stroke to work the clutch. Another idea would be a hydraulic slave cylinder working off of a modified emergency brake...

Are the rotors and discs rated for the GVW of the duece? They look like they came off of a pickup truck and not a medium duty truck which the duece is.

I have a 16 wide x 12 high door and I wish it was 14 high now.

Nice work for some reason I am having a hard time swing the PDF. Can you send me the drawing in ACAD 2004 or earlier format

Picked up a M328 Bridging Truck. It's *%#&#* BIG!! How wide are the front fenders and bumper?

Highway 55000 trailer towed on the fifth wheel, 30000 trailer towed on the pintle and a gvw of almost 76000. Those data plates say it all

If I get a few things at Home Depot I take the work truck. If if is a big load I have the lumber yard deliver it.

I do not want to pry but since you mentioned being in a wheel chair I need to ask how you are going to operate the gas and brake pedal?

I can not believe you are thinking about driving this truck at all.

That us a serious issue and the truck should not be driven until you fix the problem. I have never had one go that far off center. Does the wheel have a lot if play in it, will it turn without turning the wheels. Check the the whole front end start the steering box, be sure to check the frame...

I think I recognized were they work was performed

2100 is the RPM for the rated HP The redline is above what the governor is set at which is provably 2800 RPM The 800 series 5 ton has a tag on the dash that warns the operator to nit exceed 2800 RPM

Nice project

I found the following ratios for the Allison in another thread. http://www.vibratesoftware.com/html_help/2011/Allison/allison_5speed_auto_trans.htm#MT%20654CR 1st - 4.17 2nd - 2.21 3rd - 1.66 4th - 1.27 5th - 1.00 Rev - 10.76

Have you used this mechanic before? How did you find him?