Search results

Thanks to both of you, enjoy Thursday's feast and drive safely Robert.

Just use a standard 12volt charger and hook it up to one battery at a time, no need to unhook or remove them.

Check to make sure it is getting fuel, try bleeding the fuel filter and look for good flow, check to make sure you have voltage at the glow plugs, try cracking the injector line at the injector to see if fuel is making it there. Never heard back on the M1028 brackets. Mark

Robert, it would be fine to leave it with Scott(scooter?), it would be closer there. I am on a long stretch at work now and would be unable to travel now. Sounds like the trailer behaved itself behind the shoe box, great!. Mark

OK, next time I run it I will try the cold weather setting on the air filter.

Should be the same, I believe the only different one would be the M1010.

Thanks all, yes it does run fine and it was sort of misty out and about 46-50 degrees. I believe I have the high speed set at 3/4 to 1 turn as specified in the manual. Thanks Mark

I just bought a 3kw MEP-026A genset and noticed when running it today the carburetor intake elbow is frosting up and the top of the carb is very cold as well. I leaned out the main jet as much as I could thinking it might be running rich and the extra fuel might be causing it but no change...

There should be a rod going from the windshield frame top corner back to where the door/side curtian rod intersects the top bows. If you need pictures can post them tomorrow. Mark

First thing I did with my M1008 from VA was drive to the dump and tossed it all on the metal/scrap pile. Except for looks not very practical. Try driving at speed with the tarp on, like having a sail raised. I have another set as well ready for the dump that I just got from FT. Drum, I doubt...

I just picked up two M103A3 trailers there myself. Vehicle/trailer reg and ins and occupant ID required at the gate. Gate staff had no idea what GL was, mention DRMO and they knew. The trailers stack quite well, I wish now I had bought 4 instead of two. Avoid the main gate if you can, I...

Colemans in PA lists both singles and doubles for sale. http://store.colemans.com/cart/tire-chains-pair-900-x-20-dual-wheel-p-2044.html

Thanks towerguy, will do. Would be nice to have it secured before snow flies! Mark

Thanks BC, that would be great. I am only 1 hour from there. If you need any help or pre trip inspection let me know as I can take care of it before you arrive. Mark

Still looking for the fuel heater for my teletype shelter, it's been a while since I posted my first inquiry. Model UH48E or T-15K. Thank you.

Thanks Robert, that is great news. I have several contacts there and I suspect linking up with you will be no problem. Those scrapyards can be fun and dangerous at the same time. 6 monthes ago that metal would have been worth alot more, the price dropped quite a bit recently. SSG Mark...

Sounds like it may be powered by a diesel engine.

That's the heater I need, my shelter has all the connections still present, just need the heater. Thanks for the pictures. Pm'd on the tty's.

Still looking for cables W-1 and W-6, and the fule heater for the teletype shelter. thanks

BTT Thank you.