Search results

Not a snide remark, but just sharing some advice. A single 3" exhaust will flow ~750cfm alone. That can support 350hp no problem. My experience with diesels in general has been that the exhaust diameter really doesn't matter provided that there's nothing to impede the flow. I had ran a 5.9...

But. It doesn't have to be the last....

I've got a PRC-320 as well. I've been planning on doing the LSB mod to it. Just haven't gotten around to it.

There aren't any clutch packs in the HMMWV diffs. The torsen diff uses only gears.

I should have added that the trailers I'm working on and have done this in the past were home built, just not by me. So that might be an issue on trying to use this path for a manufactured trailer.

Nope, it's riveted onto the tongue where that green spot is on his.

Without having that plate, you'll never know what the serial of the trailer is. Is there a process to register a home built trailer in your state? I have done this in Georgia where the DMV provided a VIN plate that I riveted onto the trailer. Then a LEO comes out to inspect that the plate has...

There's two gauges that can never be trusted on a MV. The mileage indicator and the fuel level indicator. ;)

OOOF! That has no place being mounted there.

What is clamped to the leaf spring pack?

It sucks because of a few reasons. 1. There's over 75 gigs of data to this forum alone. 2. It's a SQL database. Trying to search on three letters by default doesn't work. It's a limitation. 3. Most people just punch something into a search and think a result will come out they're after. Let's...

Check the cut off cable on the side of the injection pump. It's just two screws holding it on. Make sure that slides freely. It can prevent it from starting, as well as make it run away at times too. If in doubt, pull the intake tube off the turbo, then have a big phone book, MSC catalog, or...

Also due to how databases work in general, it might be hard to find three letter acronyms. IE: STE or ICE. In that case, I recommend using the google search bar on the homepage. But add in HMMWV which will also loop in the HMMWV forum.

So I had a few more pics from this. Honing that bushing for the pto gear was a pain. Also the lift arm bolts were rusted from never being used so I used a die on them. Over the weekend I finally got the bush hog hooked up to it that I got from @twright a while back. Ended up rebuilding that pto...

I also second going to tractor supply for the hardware. Most affordable way to buy grade 8 hardware. They price by the pound, not piece.

Poll is up! https://www.steelsoldiers.com/threads/steel-soldiers-mv-of-the-month-2022-march-vote-here.208317/

Welcome to the MV of the month poll sponsored by Consolidated Press. If you need decals, magnets, stencils, or anything printing related, please give them a call! Now, onto the vote! Please vote for MV of the month! Feel free to campaign in this thread, but please keep it here and not via...

I tend to despline hubs for people here already. I used to have a source (CSI out in Tallapoosa) but they closed up a couple years ago. Honestly if there's a need/desire to do this, I'll build a machine to do it. Maybe someone knows where a lot of the runflats are?

That wouldn't be hard to construct a machine to do.

Wow. That's a chunk of change sitting there even just as parts.