Search results

That looks like a 101.

It's a Cummins part...P/N 208087. Don't know if it is still a good number, but I can check price and availability tomorrow.

He splained it to me, IIRC it has something to do with the way the lights cycle.

I wouldn't reuse the piston. The above post is correct about replacing the rod too. Take the heads(s) to a rebuilder and have them checked out. Amazing that a stud or other things that long can get into a cylinder.

Yes. Antennaclimber makes them. He shipped some to the Museum for testing. They work great. We have gen1, he has a gen2 available now. He has an ad in the classifieds and I think a sticky the top of the CUCV form.

Put a bit of pressure on the compressor belt and it will turn the engine over fine.

Lonesome, you need to find someone close to you that can lay hands on. It's been over a month and you've made zero headway. Sorry man.....

Never used copper coat. Never had issues.... Not even on MC or briggs stuff.

:ditto:You wouldn't have hard starting, erratic idle issues if that failed, you'd have a GIANT mess!

:roll: Where's the chlorine? The gene pool needs a dose.

Here's one.

Funny, but stop it!

Get with 100dollarman. Maybe he can help out. He delivers trucks on a trailer.

/\ :ditto: Also, JC Whitney sells the weatherstrip

I made braided stainless for mine. IIRC it cost around $80.00 for all the material, fittings and hose, but well worth the piece of mind knowing that the rubber ones aren't there to leak and break.

After you find the thread you want to link, up on the address bar at the top of the internet browser, highlite it and right click/copy it. go to the thread you want to put the link into, right click in the field and hit paste.

Yes, the trans and t-case will get VERY hot after an hour or more of run time at speed. I hit mine with an IR thermometer after a 2 hr drive and after 5 min of stop time it was at 160.

18 month old thread guys!

If it got down past the valve and into the cylinder, it is now a curled up ball of FOD. Taking the exhaust off most likely won't allow you to get it out. You know which bank it went down just pull that head? Well, since you are more than 1/2 way there, just pull both heads and that way you will...

I think yes since he has a knock. Time to pull the heads. How long is...er...was the stud?