• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Guyfang

    Mep 802A no power to lugs. Power to receptacle.

    And no idiot light comes on?
  2. Guyfang

    Mep 802A no power to lugs. Power to receptacle.

    I would say that the K20 is not staying closed? Can you start the set, turn on the S7, and then close the K1?
  3. Guyfang

    MEP-06A reverse power warning and ckt brkr light stays lit

    Will the CB2, (Output Circuit breaker) light, (DS2) come on, if the engine is stopped and the S2, (Engine start stop switch) is in the run position?
  4. Guyfang

    MEP-06A reverse power warning and ckt brkr light stays lit

    Lets start with you telling us, what the problem is, and what the set will and will not do. 😂 Now I understand that you started your own thread. We need to get some more basic facts.
  5. Guyfang

    mep-005a giving me a reverse power warning.

    New thread?
  6. Guyfang

    mep-005a giving me a reverse power warning.

    How did we go from K15 to K14? Have I missed something?
  7. Guyfang

    M1078 outer reduction

    Actually, could be at LEAST as much possible, that a Civilian contracted mechanic did it.
  8. Guyfang

    Mep 802A no power to lugs. Power to receptacle.

    It's weird that I can get it to trip the contact with the switch. But it will not hold. What do you mean here? What contact? What switch?
  9. Guyfang

    MEP803A Wont Shut off

    Is this set new to you? Have you ever seen it with your own two eyes, work right? Because if not, some of the hardware Ray mentioned, may not be the right hardware, or its not correctly hooked up. Take a picture of it, both turned off, and running. Post it here.
  10. Guyfang

    Just when you thought you've seen it all!

    I too, had the surgery. What a relief. I had spent more time at work picking up stuff that fell out of my hand, then I did working.
  11. Guyfang

    Just when you thought you've seen it all!

    There is a hard core of extremely good generator guys in this forum. You guys are a big part of it.
  12. Guyfang

    Steel Soldiers MV of the month 2023 - January VOTE HERE!

    I drool a lot. But maybe its old age.
  13. Guyfang

    Electric Priming Pump on MEP-804A

    6. Fuel System: Type of Fuel DF-1, DF-2, DF-A, JP4, JP5, JP8 Fuel Tank Capacity 14 gal. (53 liters) Fuel Consumption Rate (50/60 Hz): MEP-804A 1.50 gal. (5.7 liters) per hour MEP-804B 1.20 gal. (4.5 liters) per hour Fuel Consumption Rate (400 Hz): MEP-814A 1.75 gal. (6.6 liters) per hour...
  14. Guyfang

    MEP 805B wired to split 400amp panels

    6 inchs of snow this morning! Cold?
  15. Guyfang

    Ammo can battery box

    I saw some kind of 50 cal cans in storage, in Bayreuth, at a facility for Reutilization of ammo cans. Must have been 10-12 years ago. The facility was closed down, after the Post was given back to the German government. We were putting PE on the roof. It was 50 cal, I read it on the side of the...
  16. Guyfang

    Just when you thought you've seen it all!

    Some fool just did not know what he was doing. Switch two wires in the control panel and you can create a "Problem" in a set. Since the MEL is 0.00%, that means spend no money or time fixing it. Turn it in. No, some fool just got in over his head. For a tricky one, hows this. An SS member and...
  17. Guyfang

    NM from Kansas City

    Greetings and salutations!
  18. Guyfang

    CTIS Replacement lines needed.

    Thank you!
  19. Guyfang

    Operation: Gertrude. Kendelrios M715 restoration thread

    I've whacked my head about 18 times so far..... You are not even getting started. I liked to wear my pile cap, all the time when driving them.
  20. Guyfang

    M1167 Turret delete plate questions.

    Thats all there was.
Top