Search results

You CAN turn anything into anything if your determined!. Here are pictures of me pinching the radio (fully fitted camper)Body from off my Praga and grafting it onto my REO M54A2!. I like the look of the radio/ machine bodies on Russian trucks. SO, now I have the best of two worlds.(countries).

We have a deuce owner panicking over here, A/ because he doesn't know what BUD NUTS are, B/ he has USED the INNER WHEEL holding wheel nuts to bolt on SINGLE wheels . C/ Having simply REMOVED the OUTER WHEEL bolting that on with the orriginal inner long nuts. Thread answers seem to indicate...

Well Done! congratulations, awsome journey that..and I thought 200 miles or so was along way, and our motirways bore me..that last stretch into the distance HOW did you occupy your mind lol! anyway well done good luck in your new location.

If you have a master battery isolation switch turn it off. After the batteries cool down. Remove them. Have them checked. Then Check for a VEHICLE WIRING short circuit. You can test with a meter first. or with Everything switched off place 6/ or 12 volt accross the + and - WITH SMALL 24 VOLT...

The BRIDGE or POLE truck has the longer studs if you can find a parts one.

That's a really nice looking truck! I agree with the colo' scheme..ALL mine are "subued" cammo which I think looks more (aggressive) impressive. And just looks the part at shows etc. You will enjoy the experience of for sure.

And they HAVE diff locks. (note the tires are inflated!)

you seem to be very experienced to do that trick..but then it does state (the tm) Never to roll back in forwards gear. or forward in reverse come to it. ( guess it's once bitten twice shy )But, to check first jack up the front end and rotate a wheel backwards in forward gear, then forward in...

73M819 I managed to track back to the thread and your answer. I have E.mailed your answer to them, which also supports my comments to them. Thanks. D.M.

73M819:freewheeling hubs won't work on a deuce sprage set up : Can you quallify for the inexperienced transmission people on here WHY the free wheel hubs (expensive and recommended! ) modification in many previouse posts notes and encouragement don't work??. or by the same token therefore a...

Sometimes google maps are placed quite far back in time , so the stuff may have been cleared in fact though. A phone call to any local sevices etc might reveal helpfull local knowledge of the site.

I wonder why the American trucks were not fitted with diff locks?...If that had been fitted so, it would have crawled out unasissted on tickover no fuss. Ah-Lah Kraz mog etc. praga etc.

A vast....Huge......big......says a "lot" (load ) of trucks (to me) a C..p lot means A Bad lot?. I opened the post expecting to see load of junk and maybe problems.

On the M45 Fire truck on the front body behind the drivers door. On the M62 Wrecker On the Scuttle panel just in front of the divers door imediately behind the Pioneer rack on the wing.(fender). (hard to see but pictures to show) . On the M54 (camper with rhe russian body) Pssenger side on the...

Thank you J. It really lump in throats me and makes us thankfull for what we do have. I will keep you informed and might start a seperate thread when I return saturday. Mebbe a few forlks could E.mail him?.. Just a thought I will know more on return from the fund raising event.

Here's my A1..Only had it about a month. the markings (to the jeep) are correct . the size not. But I only have a box of deuce/5ton stencills till later. But we wanted to get this ready (pre rally season actually) to support a charity meeting this weekend (rain forcast..No matter) Where I am...

Contamination of the shoes can alter the co-eficient and thus the effectiveness and heat of the drum. Since all brakes work on the fact that ALL energy inputs (and braking output) Convert energy into heat. then Braking = heat. A new wheel cylinder workin (now) at 99% effeciency and therefore...

That plate is (supposed to be) welded to the underside of cab floor. When iv'e replaced the Hand Brake Cable on my deuces, It was so difficult to get at, We removed the spare wheel. It is weld mounted at the appropriate angle of course. Not 90*

:grd:That, would be rather nice....... gamma goat - YouTube

:ditto:Have you a smallish electric welder? well worth getting one if not. I have a new Electronic COVERTER welder. Exellent..and Small light and definately easir to use than the conventional mig welders. Its only about 24x10 inches and BEATS my HUGE mig (that weighs about 2 tons!!) all ways up...