Search results

Are you trying to find a deuce on GL or buying from a private party? There are a lot of deuces around with heaters. When I picked up my first A2 a few years ago at Ft Indiantown Gap, PA, there were about 50 deuces on the lot. As I remember, I think everyone had a hot water heater installed...

Ditto on a lot of work. I would leave the tongue alone, keep the surge brakes and either change to a rotating lunette or even easier, use a rotating pintle on the receiver. You can get an offset for the pintle hook to make your 101 pull relatively level. Saves a lot of work and won't bind ...

This probably won't help you out because of the size, but I can get you MS27684-8 milspec drums that are painted semigloss OD. These are new, open-top drums including the top and ring. The downside is that they are 12-gallon, not 55, so I doubt you can use them. Also, I would need to have...

Carnac, you need to convince Jewell to come on down Thursday afternoon. I know he's tied up Friday afternoon and the weekend, but he could spend Thursday night. I offered him a free bunk in one of the cabins. I'm not sure if he's gotten his Deuce brakes fixed yet or not. Will you need a...

I agree 100% with what has already been said. Air is getting into your line and fuel is draining back. This would also be a good time to change out all three fuel filters for PM. If your filters are gunked up, I would also drain and clean the tank and lines.

:ditto: My A3 has a very low idle speed, but it idles smooth as silk. When I want a faster idle speed, I simply pull out the throttle a little. There is no reason a 3116 engine should idle rough, unless something is wrong. I would check filters, fuel and try cleaning the injectors with...

I would rather drive one of my deuces because that means I am not working and having fun instead. Or if I am working, it's work I want to do and am using the deuce to help with the work. I have both an A2 and and A3 and I drive them both a lot, normally several times per week, but not nearly...

I finally got my A3 hub and CTIS back together today so I'll be drving it to the rally. I took it on a 25 mile checkout drive and had no problems, so I should be good to go. I had my A2 ready as a backup just in case. I planned on having the A3 looking better, but I ended up spending all my...

I'm a firm believer in proper PM, but I also believe in 'If it ain't broke, don't fix it'. If your system is working fine, I wouldn't touch it.

I finally broke down and dismantled a defective wheel valve I've had. I never found any kits to rebuild the wheel valve. However, after dismantlement, I discovered that the wheel valves are very simple. I simply took it apart, cleaned everything with gasoline, washed the parts with hot soapy...

I would first check to see that the lower radiator hose is not collapsing under suction. The coolant is sucked from the bottom of the radiator by the pump and expelled back into the upper part of the radiator if the thermostat is opened. If the lower hose is not collapsing, the next thing to...

If there is need for a larger generator, I can bring my trailer mounted MEP-003A generator. Plenty of power, but VERY noisy.

I previously ordered 3 Large shirts but didn't specify long or short sleeve. If not too late, I would like to specify two short sleeve and one long sleeve, all large size.

I may be able to get my hands on some credential holders if you are interested. What size are they and how many holders do you think you would need?

I would also look in Europe. Try posting on http://hmvf.co.uk and ask for advice. There was a lot of American vehicles left in Europe from WWII and a lot of people are restoring them. Also, if you can find a sample, you can get almost anything duplicated.

Ditto on changing out all three fuel filters. If the WMO in the tank is not really clean, drain the tank, flush the tank and lines and fill with new clean diesel before clogging up your new filters.

Looks very good! What about putting complete names in addition in smaller font at the bottom, except for people that don't want it?

Welcome to Steel Soldiers!

Sterlun may be joining the convoy in Hiawassee, coming in from Morganton. Streamline will be joining the North Georgia Convoy in Danielsville. We're now up to four confirmed trucks and one possible.

Convoy From North Georgia We are putting the finishing touches on the convoy from North Georgia. I will be leaving Hiawassee, GA on Thursday mornhing at 0730 for the rally in my M35A3, pulling my M149A2. We will join up at the Ingles in downtown Hiawassee. We will then pick up another A3 in...