Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
With cool ambient air temperatures and an empty truck my truck takes a long time to warm up the engine to produce good heat. You said your engine temp gauge is not working so are you sure your coolant is really getting up to normal operating temperature? Maybe check with an IR thermometer.
The 1998 M1078 LMTV I bought from GP was listed as everything works, nothing wrong. The pictures showed no issues, not even any wear or scuff marks. It was one on the 5 or so cleanest looking trucks I had ever seen listed. It had only 2500 miles and all indications were that was accurate. The...
I replaced my stock air dryer with the PURest air dryer. I found the the PURest air dryer purges with much less noise than the stock air dryer. I think the quieter purges are worth something... to me anyway.
My 1998 M1078 has 5 leaf springs in the front and 3 in the rear. Not sure why some are different than others. My truck does have the self recovery winch which adds about 1,000 pounds to the truck.
I have the M1078 with the 11K SRW. I have not had to work on mine but I do use it a fair amount. Mostly to pull trees and logs. I have found pulling cable out in cold weather is a pain in the @#$! If it is really cold I try to anchor the cable end to a tree and back the truck up while the winch...
I used my SRW to pull this leaning tree over so it would not fall across the driveway and damage the pavement. It had a heavy lean over the driveway. The tree weighed about 20,000 lbs. I know this because I loaded every piece onto the truck. 1 load of firewood, 1 load of wood chips and a smaller...
I just replaced my stock headlights with Grote 7" LEDs (pn# 90941-5). They are fairly inexpensive at $119.00 each, seem to produce plenty of light and are easy to install. The Grote headlight includes a H4 adapter pigtail which I soldered onto the military wires. This allows for the headlights...
TM 9-2320-365-10
3-5. CHANGING TIRE (CONT)
(15) Route other end of safety chain
(23) through flat tire (5) and
connect to spare tire retainer (20).
(16) Lower cab (para 2-22b).
f. Follow-On Maintenance.
(1) Remove wheel chocks (para 2-21h).
(2) Notify Unit Maintenance that lugnuts need
to be...
Third from Texas is correct. These trucks shift hard. Make sure the truck is good and warm. It takes a while to warm up all that oil. Also, the shifts are going to seem harder when the truck is empty. Try it with a 2 or 3 tons in the back of the truck. It is quite different.
I use a 500 watt engine block heater installed in the freeze plug. In cold winter weather I leave it plugged in when parked outside. It starts easily in temperatures as low as -26F. 500 watts is more than enough for my needs. The coldest I have ever seen at my house is -36F but that was before...
"agree an alternator type belt would not cut it. Maybe two belts would. though? or change to different pulley and belt type such as toothed belt like for timing belts?"
I have a 12" Morbark wood chipper powered by a Ford 300 cubic inch stationary industrial motor. The motor turns a shaft...
Quebec, Canada had proposed a ban on all ex military vehicles from virtually all of their roads. It was to take effect about September 1 2019. I am not sure what the status is on that ban now. I am also not sure how that ban might be applied to vehicles registered in the USA.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!