Search results

You just gotta pull the hub off and whack them out from the outside, and put them in from the inside. NAPA or any truck parts place will have the studs.

Well, after a little bit of sleep, I decided I should get to work on the front brakes and knuckle boots. Got it jacked up and torn down pretty fast, started cleaning things, well, found the reason for the notchy feeling rt front wheel and found out what the noise was.That put a stop to things...

OOH, i love this part, nopics :wink:

Silicone or putty that the local windshield repair place uses.

We put dextron II in the transmissions in busses and garbage trucks.

Mike, Thursday the 6th. JDToumanian, and I think bigmike will be traveling up there. Gonna go to TNT cafe for b-fast. Maybe Hole will come too. Give me a call. 626-840-1751.

I have the TM9-2320-209-10-1, 1HR, 2, 3 and 4, and TM9-2320-209-20-2-1, 2 and 209-20-3-1, 2, 3. I can post them here or copy my discs and send them to you.

Add a few more shims. Make sure the snap ring is in the groove.

DOH!

With it runing, loosen 1 line at a time at the injector and see if the sound of the engine changes. WARNING...There is high pressure fuel in the lines, DO NOT put a bare hand over the fuel stream. You can fold up a couple of cloth shop towells and let the fuel spray into the rag, just so it...

Greg, Can you ake a picture? I have not had mine off yet...the front bearings/nuts, but I have had the hubs off a few times and saw no seals.

OK, first, NO PICS....my bad aua , had a camera, but was too....focused to take pics. A sweet M151A2, hard top, a tad dented, UNCUT, :shock: pretty straight, glass is good. Has civy tires and runs. Is 5K a good price? Hasn't been registered, but has all the papers. I noticed no tailgate. Is...

Bruce, does your truck have current tags? Is parking allowed on you street...for trucks? I'd still do the camera thing, that way you know what slime bucket is doing it. Revenge is sweet! :twisted:

Just an FYI. The engine is a Big Cam IV...low flow cooling...very prone to overheating. If you need cooling system work, take it ONLY to a Cummins distributor, NOT a dealer.

Bruce, There are these shops out here that deal in strictly spy/surveillance equipment. I'd invest in a nice, small wireless job and hook it to to the truck. Then let the individual do their deeds. When you catch them red handed, 1st confront them, and insist on payment for ALL sets of...

Jon, I'm gonna be out by you next Thursday to recover a 105 I won at Barstow DRMO. I think bigmike is gonna try to come. Wanna hook up for breakfast?

It's kind of normal to have a black looking slobber out the back side especially if all you have done is idle or no load operate it. It's black 'cause the soot in the exhaust makes it that way. It will most likely smoke and smell of oil when you start out and until it gets up to operating temp...

That's a beefy hitch David. I think I might try to box the top in, don't know if the "H" brace will do any good. I gotta go look at it and do some head scratchin'.

Kenny, Got an xtra couch?....and room for two trailers and trucks?

I was thinking about a bracket from the hitch pin to the plate or to one of the 3/4 bolts that go thru the upright to stop any movement in the assembly. Thanks David. Keep the ideas comming, I think it needs something else.